Usa Industrials BULK-RS-S60-17 Silicone Rubber Sheet 36x36

Product Description

The USA INDUSTRIALS BULK-RS-S60-17 is a stock-length silicone rubber sheet designed for gasketing, sealing, vibration damping, and thermal insulation applications across HVAC, plumbing, and industrial trades. Measuring 36 inches wide by 36 inches long, this red silicone sheet carries a Shore A durometer rating of 50 to 60, placing it in the medium-firm range suitable for compression seals and cut-to-fit gaskets. It operates across a wide service temperature range of -60 degrees F to 500 degrees F, making it appropriate for both high-heat and cold-environment installations. The sheet weighs 7.4 pounds and delivers a tensile strength of 650 psi.

This silicone rubber sheet is commonly used in residential and commercial HVAC installations for fabricating duct gaskets, flue seals, and equipment vibration isolators. Plumbers and pipefitters use similar stock sheet material to cut custom seals and pipe flange gaskets where temperature cycling and chemical exposure are concerns. Industrial maintenance technicians also use silicone sheet for machinery mounts and thermal barriers. The red color aids visual identification on the job site. Because this is a stock-length sheet, multiple gasket profiles can be cut from a single piece to suit the application at hand.

Key Features

• 36 inches x 36 inches stock-length sheet allows on-site custom cutting to required gasket or seal dimensions
• Shore A durometer of 50 to 60 provides medium-firm compression resistance suitable for flange and surface seals
• Service temperature range of -60 degrees F to 500 degrees F covers both cryogenic and high-heat environments
• Tensile strength of 650 psi supports demanding mechanical sealing applications
• Red color allows easy identification and differentiation from other rubber sheet materials

Compatibility

Designed as a general-purpose OEM-style silicone rubber sheet material for fabricating custom gaskets, seals, and isolation pads in HVAC, plumbing, and industrial maintenance applications.

Installation Notes

Cutting should be performed with a sharp utility knife, die cutter, or scissors rated for rubber sheet stock. Always shut down and de-energize equipment or close relevant shutoffs before replacing gaskets or seals. Verify that mating flange surfaces are clean and free of old gasket material before installing cut pieces. Consult applicable codes such as the IFGC or ASHRAE guidelines when using elastomeric sheet material in gas or HVAC system assemblies.