Usa Industrials BULK-RS-S50FDA-235 Silicone Rubber Roll

Product Description

The USA INDUSTRIALS BULK-RS-S50FDA-235 is a stock-length silicone rubber roll designed for gasketing, sealing, and cushioning applications across a wide range of industrial and mechanical systems. The roll measures 0.75 inches wide, 0.03 inches thick, and 30 feet in length, with a pressure-sensitive adhesive backing for fast, tool-free installation. Rated for continuous service from -100 degrees F to 500 degrees F, this silicone rubber performs where standard neoprene or EPDM materials fall short. Tensile strength is rated at 650 psi. The red color aids visual identification during inspection and fitment checks.

This roll suits residential and commercial applications where a compressible, heat-resistant seal is required. Common uses include HVAC duct sealing, equipment access panel gasketing, electrical enclosure seals, and mechanical joint insulation. The adhesive backing allows the strip to be cut to length and applied directly to metal, plastic, or composite surfaces without additional fasteners or adhesives. Installers working in high-temperature zones such as furnace flue collars, boiler access panels, or industrial oven doors will find this material well matched to the service conditions.

Key Features

• Wide temperature range: rated from -100 degrees F to 500 degrees F continuous service
• Tensile strength of 650 psi for durable compression sealing
• Pressure-sensitive adhesive backing for fast, tool-free installation
• Stock 30-foot length allows on-site cutting to exact dimensions
• Red color provides easy visual identification during inspection
• Density of 69 pounds per cubic foot for consistent compressibility

Compatibility

Designed as a general-purpose silicone rubber gasketing strip suitable for HVAC, plumbing, electrical enclosure, and industrial sealing applications where high-temperature resistance and adhesive-backed installation are required.

Installation Notes

Clean and dry the mating surface thoroughly before applying the adhesive-backed strip to ensure maximum bond strength. Cut the roll to the required length using a utility knife or shears before removing the liner. Power down or isolate any equipment before installing seals on access panels, electrical enclosures, or mechanical assemblies. Follow applicable ASHRAE, NEC, or IFGC guidelines for sealing requirements specific to the installation type.