Usa Industrials BULK-RS-N70-258 Neoprene Sheet Roll

Product Description

The USA INDUSTRIALS BULK-RS-N70-258 is a black neoprene rubber sheet roll used as a general-purpose gasketing, sealing, and cushioning material in mechanical, HVAC, plumbing, and industrial applications. Cut from stock-length sheet, this roll measures 1/8 inch thick, 36 inches wide, and 12 inches long. It carries a Shore A durometer rating of 65 to 75, placing it in the medium-firm range suited for compression sealing. Tensile strength is rated at 1000 psi. The operating temperature range spans -40 degrees F to 212 degrees F, making it appropriate for both low-temperature and elevated-temperature service environments. Installers, fabricators, and maintenance technicians use this material to cut custom gaskets, vibration pads, and protective liners on the job.

This neoprene sheet roll is used across residential and commercial applications wherever a compressible, weather-resistant, and oil-tolerant elastomer is needed. Common applications include pipe flange gaskets, HVAC equipment isolation pads, equipment mounting shims, duct sealing strips, and general mechanical gasketing. The 36-inch width and 12-inch stock length allow straightforward hand or die cutting to fit standard or custom configurations without additional processing equipment.

Key Features

• Shore A durometer of 65 to 75 for medium-firm compression sealing
• Tensile strength of 1000 psi for reliable gasket and seal performance
• Temperature rated from -40 degrees F to 212 degrees F
• 1/8 inch thickness suits standard flange and gasketing applications
• 36-inch width allows wide cuts or multiple smaller pieces from a single sheet
• Black neoprene construction offers resistance to weathering, ozone, and mild oils

Compatibility

Designed as a general-purpose neoprene elastomer sheet suitable for fabricating gaskets, seals, pads, and liners across HVAC, plumbing, mechanical, and industrial service applications.

Installation Notes

Cut to shape using a sharp utility knife, die cutter, or scissors on a firm, flat surface. De-energize or depressurize any system before replacing gaskets or seals fabricated from this material. Verify that the operating temperature and chemical exposure of the application fall within the rated limits of neoprene before installation. Work performed on pressurized piping or mechanical systems should follow applicable codes and be completed by a qualified tradesperson.