Usa Industrials BULK-RS-N60-257 Neoprene Strip 4x60in

Product Description

The USA INDUSTRIALS BULK-RS-N60-257 is a stock-length neoprene rubber strip rated at 60 Shore A durometer, measuring 4 inches wide by 60 inches long. Neoprene offers solid resistance to weathering, ozone, and moderate chemical exposure, making this strip a reliable choice for sealing, gasketing, cushioning, and vibration-damping applications across HVAC, plumbing, and general industrial work. It carries a tensile strength of 1,000 to 1,200 psi and handles a temperature range of -40 degrees F to 212 degrees F. At 0.8 pounds, the strip ships as a single unit ready for field cutting or shop fabrication.

This neoprene strip is suited for residential and light commercial trade applications where a medium-firmness elastomer is needed. Common uses include equipment vibration pads, pipe and duct support liners, door and panel seals, and weatherstripping on mechanical enclosures. HVAC techs, plumbers, and pipefitters regularly stock neoprene strip for field-cut gasketing and isolation work. The 60-inch stock length supports a wide range of cut-to-fit scenarios without waste.

Key Features

• 60 Shore A durometer - medium firmness suitable for sealing and vibration isolation
• Tensile strength rated at 1,000 to 1,200 psi for durable field use
• Operating temperature range of -40 degrees F to 212 degrees F
• 4 inches wide by 60 inches long stock length for easy field cutting
• Neoprene construction resists weathering, ozone, and moderate chemical exposure
• Black color, 0.8 pounds per piece

Compatibility

Designed as a general-purpose neoprene rubber strip for trade sealing, gasketing, cushioning, and vibration-damping applications across HVAC, plumbing, and industrial installations.

Installation Notes

Field cutting is typically performed with a straight edge and a utility knife or die cutter. For adhesive-bonded installations, clean the mating surface thoroughly before applying contact cement rated for elastomers. When used as a pipe or equipment isolator, verify the durometer rating matches the load requirements of the application. No special certifications or permits are generally required for cut rubber strip installation, though system-level codes such as IFGC or IPC may govern adjacent work.