Usa Industrials BULK-RS-H70-267 Buna-n Rubber Strip

Product Description

The USA INDUSTRIALS BULK-RS-H70-267 is a black Buna-N rubber strip cut to a stock length of 60 inches with a width of 6 inches. Buna-N, also known as nitrile rubber, is a synthetic elastomer widely used in industrial and trade applications for its resistance to oils, fuels, and petroleum-based fluids. This strip carries a Shore A durometer rating of 70, placing it in the firm-but-flexible range suitable for sealing, gasketing, vibration dampening, and surface protection. Tensile strength runs between 800 and 1000 psi. The part weighs approximately 0.48 pounds and is sold as a single stock-length piece.

This rubber strip is appropriate for use in plumbing, HVAC, industrial maintenance, and general mechanical applications where a durable oil-resistant barrier or cushioning material is required. It is commonly cut to length on-site and applied as door seals, equipment pads, conveyor bumpers, pipe supports, or custom gaskets. The 6-inch width provides flexibility for wide sealing surfaces or multiple narrower strips cut from a single piece. Installers working in environments with frequent petroleum fluid exposure will find the Buna-N compound a reliable material choice.

Key Features

• Buna-N nitrile compound offers strong resistance to oils, fuels, and petroleum-based fluids
• Shore A durometer of 70 delivers firm compression with controlled flex
• Tensile strength rated at 800 to 1000 psi for durable load-bearing sealing applications
• Operating temperature range from -20 degrees F to 170 degrees F suits most HVAC and mechanical environments
• Stock length of 60 inches allows on-site cutting to required dimensions
• 6-inch width accommodates wide sealing surfaces or multiple custom cuts

Compatibility

Designed as a general-purpose stock-length rubber strip for use in industrial, HVAC, plumbing, and mechanical trade applications requiring an oil-resistant nitrile elastomer material.

Installation Notes

This strip is typically installed by HVAC technicians, plumbers, pipefitters, and industrial maintenance personnel. Cut to final dimensions using a sharp utility knife or shears against a straightedge before fitting. Ensure mating surfaces are clean and free of grease or debris prior to installation. When used in enclosed mechanical spaces, confirm the operating environment stays within the rated temperature range of -20 degrees F to 170 degrees F.