Usa Industrials BULK-RS-H60-248 Buna-n Rubber Sheet

Product Description

The USA INDUSTRIALS BULK-RS-H60-248 is a stock-length Buna-N (nitrile) rubber sheet used for gasketing, sealing, padding, and vibration isolation across a wide range of industrial and mechanical applications. It measures 12 inches wide by 24 inches long and carries a Shore A durometer rating of 50 to 60, placing it in the medium-soft range for flexible sealing work. The sheet is black and weighs approximately 1.8 pounds. Tensile strength is rated at 900 psi, providing reliable resistance to tearing under moderate mechanical stress. HVAC technicians, plumbers, pipefitters, and industrial maintenance professionals commonly cut this material to custom gasket or seal dimensions on the job.

This Buna-N sheet is suited for applications requiring resistance to oils, fuels, hydraulic fluids, and many common industrial chemicals. It performs across a temperature range of -20 degrees F to 170 degrees F, making it appropriate for both refrigeration-adjacent and moderate-heat piping environments. Typical uses include fabricating custom gaskets, pipe flange seals, anti-vibration pads, and equipment isolation mounts in residential, commercial, and light industrial settings.

Key Features

• Buna-N (nitrile) rubber construction offers solid resistance to petroleum-based fluids and oils
• Shore A durometer of 50 to 60 provides a flexible yet firm sealing surface
• Tensile strength of 900 psi supports reliable performance under mechanical load
• Operating temperature range of -20 degrees F to 170 degrees F covers most HVAC and plumbing service conditions
• Stock sheet size of 12 x 24 inches allows field fabrication of custom gaskets and pads
• Single-piece packaging with no minimum order beyond one unit

Compatibility

Designed as a general-purpose Buna-N rubber sheet suitable for fabricating gaskets, seals, and isolation pads in oil-resistant applications across HVAC, plumbing, and light industrial service work.

Installation Notes

Cut to required dimensions using a sharp utility knife, die cutter, or gasket punch set on a firm cutting surface. De-energize or shut off fluid flow to any system before replacing gaskets or seals fabricated from this material. Verify chemical compatibility with the specific fluid or media in contact before installation. Work should be performed by a qualified trade professional in accordance with applicable mechanical and safety codes.