Usa Industrials BULK-RS-EN70-23 Neoprene Sheet Roll

Product Description

The USA INDUSTRIALS BULK-RS-EN70-23 is a neoprene rubber sheet roll cut to 12 inches in length and 36 inches wide, with a thickness of 3/8 inch (0.375 inches). It carries a Shore A durometer rating of 65 to 75, placing it in the medium-firm range suitable for gasketing, sealing, vibration dampening, and wear pad applications. The operating temperature range spans -20 degrees F to 220 degrees F, and tensile strength is rated at 1000 psi. HVAC technicians, plumbers, pipefitters, and industrial maintenance crews commonly use neoprene sheet stock like this to fabricate custom gaskets, pipe supports, and isolation pads on the job or in the shop.

This neoprene sheet roll is appropriate for both residential and commercial applications where moderate oil resistance, weather resistance, and flex durability are required. Typical uses include cut-to-size pipe isolation pads, equipment mounting pads, flange gaskets, and sealing inserts. The black color and standard 36-inch width make it compatible with standard roll-cutting fixtures. The cut-to-length format means the piece ships at exactly 12 inches, ready for immediate fabrication without additional trimming of excess stock.

Key Features

• Shore A durometer of 65 to 75 for medium-firm compression resistance
• Wide service temperature range: -20 degrees F to 220 degrees F
• Tensile strength of 1000 psi for durable gasketing and sealing applications
• 36-inch width accommodates large-format cuts and custom fabrication
• Cut-to-length format at 12 inches reduces material waste
• Neoprene compound provides moderate oil, ozone, and weather resistance

Compatibility

Designed as a general-purpose neoprene sheet stock for trade and industrial use, suitable for fabricating gaskets, pads, and seals across HVAC, plumbing, and mechanical applications where neoprene compound properties are specified.

Installation Notes

Cutting should be performed with a sharp utility knife, die cutter, or band saw appropriate for rubber sheet stock. When used as a pipe isolation or vibration pad, ensure contact surfaces are clean and free of grease before installation. For flange gasket applications, follow applicable ASME or system-specific torque and compression requirements provided by the equipment manufacturer. Personal protective equipment including cut-resistant gloves is recommended during fabrication.