Usa Industrials BULK-RS-EN60-24 Neoprene Sheet Roll

Product Description

The USA INDUSTRIALS BULK-RS-EN60-24 is a black neoprene rubber sheet roll used in gasketing, sealing, padding, and vibration-dampening applications across HVAC, plumbing, industrial, and general mechanical trades. Measuring 0.5 inches thick, 36 inches wide, and 12 inches long, this stock-length sheet is cut-ready for field fabrication. It carries a Shore A durometer rating of 50 to 60, placing it in the medium-firm range suitable for compressible seals and wear pads. Neoprene construction provides resistance to oils, weathering, and moderate chemical exposure. Weighing 12 pounds, the roll is substantial enough for commercial and light industrial use.

This sheet roll is suited for residential and commercial applications where a durable, flexible elastomer is needed. Typical uses include custom-cut pipe insulation pads, equipment vibration isolators, flashing underlayment, door and panel seals, and HVAC equipment mounting pads. The 36-inch width accommodates wide cuts without splicing. Because it ships as a stock length, tradespeople can size it on-site to fit the specific installation without ordering custom-dimensioned material.

Key Features

• Shore A durometer 50 to 60 - medium-firm compression suitable for seals and vibration pads
• Temperature range of -20 degrees F to 220 degrees F for broad service conditions
• Tensile strength of 900 psi for tear resistance during cutting and installation
• 0.5-inch thickness provides substantial cushioning and sealing depth
• 36-inch width minimizes splicing for large-format gasket and pad fabrication
• Black neoprene resists oils, ozone, and general weathering

Compatibility

Designed as a general-purpose neoprene rubber sheet material for field-fabricated gaskets, seals, pads, and isolators in HVAC, plumbing, and industrial applications.

Installation Notes

Cut neoprene sheet using a sharp utility knife, die cutter, or scissors; a straightedge guide ensures clean, accurate cuts. Ensure mating surfaces are clean and free of oils or debris before applying cut pieces as gaskets or seals. For vibration isolation pads, verify that the load rating and deflection requirements of the application are met before installation. Follow applicable mechanical and building codes when incorporating elastomeric materials into pressurized or structural assemblies.