Usa Industrials BULK-RS-EN60-23 Neoprene Sheet Roll

Product Description

The USA INDUSTRIALS BULK-RS-EN60-23 is a neoprene rubber sheet roll designed for gasketing, sealing, padding, and vibration-dampening applications across HVAC, plumbing, and industrial trades. Measuring 0.375 inches thick, 36 inches wide, and 12 inches long, this black neoprene sheet ships as a stock-length cut ready for fabrication. It carries a Shore A durometer rating of 50 to 60, placing it in the medium-firm range suitable for compressible seals and insulating pads. Tensile strength is rated at 900 psi, supporting reliable performance under moderate mechanical load. Tradespeople and fabricators cut this material to shape for custom gaskets, pipe supports, equipment mounts, and weather seals.

This neoprene sheet roll is suited for residential and light commercial HVAC installation, mechanical rooms, plumbing rough-in, and general industrial fabrication. Common applications include pipe wrap, equipment isolation pads, duct sealing strips, and anti-vibration mounts. The material is rated for service between -20 degrees F and 220 degrees F, making it appropriate for both heating and cooling system environments. It weighs approximately 9 pounds per packaged unit.

Key Features

• Medium-firm 50 to 60 Shore A durometer for compressible sealing and vibration isolation
• 900 psi tensile strength for dependable performance under mechanical load
• Operating range of -20 degrees F to 220 degrees F covers most HVAC and plumbing service conditions
• Stock-length cut at 12 inches long by 36 inches wide allows immediate field fabrication
• 0.375-inch thickness provides substantial sealing mass for gasketing and pad applications
• Black neoprene construction offers resistance to weathering, oils, and moderate chemical exposure

Compatibility

Designed as a general-purpose neoprene rubber sheet roll suitable for custom gasket fabrication, vibration isolation pads, and sealing strips in HVAC, plumbing, and industrial applications where a medium-firm, stock-length neoprene material is required.

Installation Notes

Cut to the required shape using a sharp utility knife, die cutter, or scissors on a clean flat surface. Ensure mating surfaces are clean and free of grease or debris before installing as a gasket or seal. Shut down and de-energize or depressurize any equipment before replacing existing gaskets or isolation pads. Follow applicable mechanical codes for the trade and system type in which this material is installed.