Usa Industrials BULK-RS-EN40-21 Neoprene Sheet Roll

Product Description

The USA INDUSTRIALS BULK-RS-EN40-21 is a stock-length neoprene rubber sheet roll used as a general-purpose sealing, gasketing, and vibration-isolation material across HVAC, plumbing, and industrial service applications. The sheet measures 36 inches wide by 12 inches long with a thickness of 0.188 inches and weighs 4.5 pounds. It carries a Shore A durometer rating of 35 to 45, placing it in the soft-to-medium firmness range suitable for conformable gasket cutting and cushioning work. The black neoprene compound is rated for continuous service from -20 degrees F to 220 degrees F, making it a reliable choice for moderate-temperature installations.

This neoprene sheet roll is suited for residential and commercial applications where a cut-to-fit elastomeric material is needed. HVAC technicians use neoprene sheet stock to fabricate custom gaskets for duct connections, equipment pads, and vibration isolators. Plumbers cut it for flange gaskets and pipe support cushioning. The 36 x 12 inch stock size provides a workable blank for most field-cut or shop-cut applications without excess material waste. The tensile strength of 800 psi supports moderate mechanical loading in clamped or bolted assemblies.

Key Features

• Neoprene rubber construction rated from -20 degrees F to 220 degrees F
• Shore A durometer of 35 to 45 for soft-to-medium compressibility
• 0.188 inch thickness suitable for gasket and pad fabrication
• 800 psi tensile strength supports clamped and bolted joint assemblies
• Stock-length format at 36 inches wide by 12 inches long for field or shop cutting
• Black color, uniform throughout the sheet

Compatibility

Designed as a general-purpose neoprene sheet stock for cut-to-fit gasketing, sealing, padding, and vibration-isolation applications across HVAC, plumbing, and light industrial service work.

Installation Notes

Cut to the required shape using a sharp utility knife, die cutter, or hole saw on a flat, stable surface. Ensure all mating surfaces are clean and free of oil or debris before installing a cut gasket into a bolted joint. Follow applicable mechanical and plumbing codes for gasket material selection when used in pressure-rated or fluid-carrying assemblies. Neoprene sheet stock should not be used in contact with petroleum-based fuels or strong oxidizing agents unless the application has been verified for chemical compatibility.