Usa Industrials BULK-RS-BHS70-235 Buna-n Sheet Roll 36in

Product Description

The USA INDUSTRIALS BULK-RS-BHS70-235 is a cut-to-length Buna-N (nitrile) rubber sheet roll used for gasketing, sealing, vibration dampening, and general fabrication applications in industrial and mechanical service environments. The roll is 36 inches wide and 0.062 inches thick, with a Shore A durometer rating of 65 to 75, placing it in the medium-firm hardness range. Tensile strength is rated at 1,500 psi. The material handles a service temperature range of -40 degrees F to 212 degrees F, making it suitable for both cold-weather and elevated-temperature installations. Plumbers, pipefitters, millwrights, and HVAC technicians commonly work with this material when fabricating custom gaskets or protective pads on the job.

This Buna-N sheet roll is well suited for oil-resistant sealing applications, fluid system gaskets, equipment pads, and protective liners in residential and commercial mechanical rooms. Buna-N performs reliably when exposed to petroleum-based oils, fuels, and hydraulic fluids, making it a common choice in pump rooms, compressor stations, and piping assemblies. The cut-to-length format allows fabricators to cut pieces to the exact size required for the job, reducing waste and enabling custom fitment for a wide range of flange sizes and equipment bases.

Key Features

• Buna-N (nitrile) compound with strong resistance to petroleum oils and fuels
• Shore A durometer of 65 to 75 for medium-firm compression sealing
• 36-inch width accommodates large gasket blanks and wide sealing surfaces
• 0.062-inch thickness suitable for standard flange and equipment pad applications
• Tensile strength of 1,500 psi for durable in-service performance
• Temperature rated from -40 degrees F to 212 degrees F

Compatibility

Designed as a general-purpose cut-to-length rubber sheet for custom gasket fabrication, sealing, and vibration isolation across a broad range of industrial and mechanical trade applications.

Installation Notes

Cut to required dimensions using a sharp utility knife, die cutter, or gasket punch set on a flat cutting surface. When using as a flange gasket, ensure mating surfaces are clean, flat, and free of debris before installation. Always follow applicable mechanical or plumbing codes for the system being serviced. Isolate and depressurize any system before replacing gaskets or sealing components.