Us Motors WDP32S2ACR 1.5 Hp Tenv Three Phase Ac Motor

Product Description

The US MOTORS WDP32S2ACR is a three-phase, energy-efficient AC motor built in a Totally Enclosed Non-Ventilated (TENV) enclosure for use in demanding or washdown-rated environments. Rated at 1.5 HP and 1725 RPM nameplate speed, it operates on 208 to 230 volts or 460 volts at 60 Hz, making it suited for both standard single-voltage and dual-voltage panel configurations. The 145TC frame with C-Face mount provides direct bolt-on compatibility with C-Face-adapted gearboxes, pumps, and other driven equipment. Full load amperage is 4.9 to 4.8 amps at 208-230 volts and 2.4 amps at 460 volts. This motor is installed by licensed electricians and industrial maintenance technicians in commercial and light industrial applications.

The WDP32S2ACR is designed for washdown applications where moisture exposure is a routine operating condition. The TENV enclosure prevents water and contaminants from entering the motor housing without relying on a cooling fan, making it appropriate for food processing support equipment, pump drives, conveyor systems, and similar installations where periodic spray-down cleaning occurs. The C-Face mount style simplifies direct coupling to driven loads. With a reversible rotation, the motor can be wired for either direction of shaft travel to suit the driven equipment layout.

Key Features

• TENV enclosure rated for washdown environments, no external cooling fan required
• Dual-voltage operation: 208 to 230 volts or 460 volts at 60 Hz
• 145TC frame with C-Face mount for direct-coupled equipment installations
• 1725 RPM nameplate speed with Class F insulation for thermal durability
• Reversible rotation configurable at wiring
• Ball bearing construction for reduced maintenance intervals
• Full load efficiency rating of 87.50 percent meets energy-efficient standards

Compatibility

Designed as an OEM-style replacement or direct-drive motor for three-phase industrial and commercial applications requiring a 145TC C-Face frame in a TENV enclosure. This unit carries Dayton part number 4VZ26 as a cross-reference.

Installation Notes

Installation should be performed by a licensed electrician following applicable NEC requirements for motor branch circuit protection, disconnecting means, and overload protection sizing. Disconnect and lock out all power sources before mounting or wiring the motor. Verify that the supply voltage and phase configuration match the motor nameplate before energizing. Do not operate the motor without proper overload protection sized to the full load amperage rating.