Us Motors WDP1S2ACR 1 Hp Tenv Three Phase Ac Motor 145TC

Product Description

The US MOTORS WDP1S2ACR is a three-phase, energy-efficient AC motor built in a TENV (totally enclosed, non-ventilated) enclosure for demanding environments. Rated at 1 horsepower and 1725 RPM nameplate speed, this motor operates on 208 to 230 volts or 460 volts at 60 Hz. The 145TC frame with C-Face mount ensures direct mechanical compatibility with standard driven equipment. Class F insulation and a 1.15 service factor provide thermal headroom under sustained load. Ball bearings support the shaft, and motor rotation is reversible. Installed by licensed electricians and mechanical contractors in commercial and industrial settings.

This motor is rated for washdown applications, making it appropriate for food processing, beverage, and similar wet or washdown environments where a sealed enclosure is required. The TENV construction eliminates the open ventilation paths that could allow water or debris intrusion. With a 145TC C-Face frame, it mounts directly to pumps, gear reducers, and other C-Face-compatible driven loads. Full load amperage is 3.5 to 3.4 amps at 208 to 230 volts and 1.7 amps at 460 volts, supporting wiring for either voltage configuration.

Key Features

• TENV enclosure rated for washdown environments
• 1 HP output at 1725 RPM nameplate speed
• Dual voltage: 208 to 230 volts or 460 volts, 60 Hz, three-phase
• 145TC frame with C-Face mount for direct equipment coupling
• Class F insulation with 1.15 service factor
• Reversible rotation with ball bearing construction
• Full load efficiency rating of 85.5 percent

Compatibility

Designed as an OEM-style replacement or direct-drive motor for three-phase, C-Face mounted equipment using a 145TC frame. Referenced Dayton equivalent part number is 4VZ24.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC requirements for motor branch circuits, including proper overcurrent protection and motor disconnect means. Disconnect and lock out all power before servicing or mounting the motor. Verify driven equipment shaft and C-Face bolt pattern dimensions match the 145TC frame before installation. Confirm supply voltage matches one of the nameplate voltage configurations before energizing.