Us Motors D32C2JCR 1.5 Hp Psc Ac Motor 56C Odp C-face

Product Description

The US MOTORS D32C2JCR is a single-phase permanent split capacitor (PSC) AC motor rated at 1.5 horsepower and designed for continuous-duty applications in HVAC and light industrial equipment. Running at a nameplate speed of 1725 RPM on a 60 Hz supply, this motor features an open drip-proof (ODP) enclosure and a 56C frame with C-Face mount, making it a direct fit for close-coupled pump and fan assemblies. Full load amperage is 21.4 amps at low voltage or 10.7 amps at high voltage. Insulation is Class B, the service factor is 1.15, and the motor rotation is reversible. Ball bearings support the shaft on both ends for reliable operation.

This motor is suited for residential and light commercial installations where a C-Face-mounted PSC motor is required. Typical applications include circulators, small pumps, blowers, and direct-drive fan assemblies in HVAC systems. The ODP enclosure is appropriate for indoor or sheltered outdoor installations where the motor is protected from direct water exposure. Licensed HVAC technicians, plumbers, and millwrights routinely install this motor type during equipment replacement or retrofit projects. The reversible rotation makes it adaptable to a variety of equipment configurations without sourcing a separate unit.

Key Features

• 1.5 HP single-phase PSC motor rated at 1725 RPM on 60 Hz
• 56C frame with C-Face mount for close-coupled equipment
• ODP enclosure for indoor and sheltered installation environments
• Reversible rotation — configurable for multiple equipment layouts
• Ball bearing construction for extended service life under continuous load
• 1.15 service factor with Class B insulation for thermal tolerance above nameplate rating

Compatibility

Designed as an OEM-style replacement PSC motor for 56C C-Face mounted equipment requiring a 1.5 HP, 1725 RPM, single-phase motor with an ODP enclosure. Cross-references Dayton part number 1K073.

Installation Notes

Installation should be performed by a qualified electrician or licensed HVAC technician in accordance with applicable NEC requirements. Disconnect and lock out all power to the driven equipment before removing the existing motor. Verify that supply voltage, phase, and frequency match motor nameplate ratings before energizing. Ensure the C-Face mounting register and shaft coupling are properly aligned before securing the motor to prevent bearing stress and premature wear.