Uniview nsw2010-24t2gc-poe-in 24-port Poe Network Switch

Product Description

The UNIVIEW nsw2010-24t2gc-poe-in is a 24-port 10/100Mbps PoE network switch designed for IP surveillance and business network deployments. It delivers up to 390W of total PoE power across 24 RJ45 downlink ports, supporting IEEE 802.3af and IEEE 802.3at standards. Two combo 1000Mbps uplink ports provide flexible fiber or copper connectivity. With a switching capacity of 8.8 Gbps and a forwarding rate of 6.55 Mpps, the switch handles high-bandwidth video and data traffic without bottlenecking. The all-metal housing and dual cooling fans make it suitable for rack-mounted deployments in commercial and light-industrial environments. Installation and configuration are handled by licensed network technicians or security integrators.

This switch is engineered for IP camera networks, small-to-medium business LANs, and surveillance systems requiring extended PoE range. The Surveillance mode extends PoE transmission distance up to 250 meters, which is critical for cameras mounted at long cable runs from the IDF or head-end rack. Secure mode isolates downlink ports so they communicate only with uplink ports, reducing lateral network exposure between connected devices. Normal mode allows full port-to-port communication for standard LAN use. These three selectable working modes make the switch adaptable to varying deployment requirements without additional managed switch complexity.

Key Features

• 24 x 10/100Mbps PoE RJ45 ports with IEEE 802.3af and IEEE 802.3at support
• 2 x 1000Mbps Combo uplink ports for fiber or copper connectivity
• Up to 390W total PoE power budget across all ports
• Surveillance mode extends PoE transmission distance up to 250 meters
• Secure mode restricts downlink port communication to uplink ports only
• 8.8 Gbps switching capacity with 4 Mbit packet buffer
• All-metal housing with dual cooling fans for reliable continuous operation

Compatibility

Designed as an OEM-style replacement or direct-install switch for IP camera networks and structured cabling environments supporting IEEE 802.3af and IEEE 802.3at powered devices.

Installation Notes

Installation should be performed by a qualified network technician or licensed low-voltage contractor. Power down all connected devices before servicing the switch or making port changes. Mount in a standard 19-inch rack enclosure and ensure adequate airflow around the unit per the manufacturer guidelines. Verify total connected PoE load does not exceed the rated power budget before energizing the switch.