

Ships same day if ordered by 12 pm
Manufacturer pricing rules prevent us from advertising our discount — no account or email required to see it.
Secure Payments
Easy Returns
Expert Advice
Fast Shipping
The UNIVIEW ipc3614sr-adf40km-h is a 4-megapixel fixed dome IP security camera designed for professional surveillance installations in commercial and residential applications. Built around a 1/3-inch progressive scan CMOS sensor and a 4.0mm fixed lens at F1.6, it delivers sharp, high-detail imaging at resolutions up to 2688 x 1520 at 25 frames per second. The 120dB Wide Dynamic Range engine handles high-contrast scenes such as entryways and loading docks. A minimum illumination rating of 0.003 Lux with AGC on, combined with onboard 850nm IR illumination effective to 30 meters (98 feet), keeps coverage active around the clock without additional lighting. Licensed CCTV technicians and low-voltage security integrators are the primary installers.
This camera is suited for fixed indoor or outdoor mounting where a wider field of view is not required and longer detection range matters. The 4.0mm lens produces an 83.7-degree horizontal angle of view, with DORI performance rated at 90 meters detect, 36 meters observe, 18 meters recognize, and 9 meters identify. IP67-rated housing makes it appropriate for exterior soffits, parking structures, and covered entryways. The built-in microphone supports audio detection and suppression without an external mic add-on. Local storage via a MicroSD card slot allows edge recording independent of a network recorder. Power is supplied via DC 12 volts or 802.3af PoE, giving installers flexibility in how they run infrastructure.
Compatible with ONVIF Profile S, Profile G, and Profile T for integration into standards-compliant VMS platforms. Supported client software includes EZStation, EZView, and EZLive. Web browser live view is supported plug-in free on Chrome 57.0 and above, Firefox 58.0 and above, Edge 16 and above, and Safari 11 and above.
Installation should be performed by a licensed low-voltage or security systems technician in accordance with applicable local codes. Power down or disconnect the PoE switch port or DC 12-volt power supply before making any wiring connections. Confirm the mounting surface can support the camera housing and that conduit or cable management meets local building requirements. When configuring network settings, apply access policies, RTSP authentication, and HTTPS to align with site security standards before placing the camera online.
Thanks for subscribing!
This email has been registered!