Uniview ipc328sr3-adf40km-g 8MP Dome Ip Camera 4mm Poe

Product Description

The UNIVIEW ipc328sr3-adf40km-g is an 8-megapixel fixed-lens dome IP security camera built for installations that demand clear imaging in challenging light conditions. Equipped with a 1/2.7-inch CMOS sensor and LightHunter low-light technology, it delivers usable footage where standard cameras fall short. The camera supports multiple resolution modes including 3840x2160 at 20fps and 5MP at 30fps, and encodes in Ultra 265, H.265, H.264, or MJPEG to accommodate a wide range of NVR platforms. A licensed electrician or low-voltage security technician handles the PoE installation, which simplifies cable runs to a single Cat5e or Cat6 line.

This dome camera fits commercial and residential security deployments where vandal resistance and weatherproofing are required. The IK10-rated dome housing withstands physical impact, and the IP67 rating seals the unit against dust ingress and sustained water exposure. The 4mm fixed focal length suits entry points, corridors, and general area surveillance in spaces with moderate to wide fields of view. The built-in microphone captures on-site audio without requiring a separate device. Corridor Mode (9:16 aspect ratio) makes the camera a practical choice for hallways, stairwells, and narrow outdoor paths.

Key Features

• 8MP 3840x2160 resolution at 20fps with 1/2.7-inch CMOS sensor
• LightHunter technology for high-quality imaging in low-illumination environments
• 120dB true Wide Dynamic Range for clear imaging in high-contrast lighting
• Smart IR with up to 30 meters (98 feet) of effective IR distance
• IK10 vandal-resistant, IP67-rated housing for indoor and outdoor use
• Built-in microphone and 9:16 Corridor Mode support
• Supports up to 256 GB Micro SD card for local edge recording

Compatibility

Designed as an OEM-style replacement and standard addition for PoE-based IP surveillance systems accepting Ultra 265, H.265, or H.264 video streams.

Installation Notes

Installation should be performed by a qualified low-voltage technician or licensed electrician in accordance with local codes and NEC Article 725 for low-voltage wiring. Power down the NVR or PoE switch port before connecting or disconnecting the camera. Mount the dome to a solid junction box or ceiling surface using the provided hardware, and verify the 3-axis adjustment is locked before finalizing the enclosure. Do not expose the lens or sensor to direct, sustained sunlight during installation, as this can damage the image sensor.