Ubiquiti POE-24-30W Poe Injector 24V 30W

Product Description

The UBIQUITI POE-24-30W is a passive Power over Ethernet injector rated at 24 volts DC and 30 watts. It supplies both data and DC power over a single Ethernet cable, eliminating the need for a separate power run to the powered device. This type of injector is commonly installed by network technicians and low-voltage electricians when deploying wireless access points, IP cameras, or other 24V passive PoE devices. The unit is a plug-and-play passive injector, meaning it does not perform IEEE 802.3af or 802.3at negotiation and delivers power unconditionally to the connected device.

The POE-24-30W is suited for use in residential and light commercial installations where Ubiquiti or other 24V passive PoE-compatible devices require both data connectivity and DC power from a single cable run. It is commonly deployed in outdoor access point installations, surveillance setups, and network edge applications where running separate power cabling is impractical. Installers should confirm the connected device accepts 24V passive PoE before use, as passive injectors do not negotiate voltage with the end device.

Key Features

• Delivers 24 volts DC and up to 30 watts over a single Ethernet cable
• Passive PoE design — no IEEE negotiation, power is supplied unconditionally
• Eliminates separate power wiring to remote 24V PoE-compatible devices
• Sold as a single unit (each), ready for immediate deployment
• Compact injector form factor suitable for wall outlet or rack-adjacent installation

Compatibility

Designed as an OEM-style passive PoE injector for use with 24V passive PoE-compatible network devices such as wireless access points, IP cameras, and similar low-voltage equipment that accept 24V DC input over Ethernet.

Installation Notes

Installation is typically performed by low-voltage technicians or licensed electricians in accordance with NEC Article 725 governing low-voltage circuits. Before connecting or disconnecting the injector, power down the upstream network switch port and unplug the injector from the AC outlet. Because this is a passive injector, never connect it to a device that does not explicitly support 24V passive PoE, as doing so may damage the connected equipment. Verify cable run length and conductor gauge meet the requirements of the powered device to ensure adequate voltage at the load end.