Tweco 1023-1288 Mig Gun 250A 15 Ft Euro-kwik

Product Description

The TWECO 1023-1288 is an air-cooled MIG gun rated at 250 amps with a 60% duty cycle, designed for GMAW, FCAW, and aluminum GMAW welding processes. Part of the VELOCITY2a Spray Master V250 series, this gun ships with VELOCITY2 front-end consumables already assembled, reducing setup time on the shop floor. The Euro-Kwik style connector provides fast, secure attachment to compatible wire feeders. At 15 feet in length, the gun gives welders adequate reach for light to medium-duty fabrication work without excessive cable weight or heat buildup at the handle.

This gun is intended for light to medium-duty fabrication environments where GMAW and FCAW processes are standard. It handles wire diameters from 0.035 inches to 0.045 inches, covering the most common solid and flux-core wire sizes used in structural tack work, sheet metal fabrication, and general manufacturing. The Euro-Kwik connector makes it a practical fit for shops already running compatible feeder equipment. The 15-foot cable length suits stationary or semi-stationary welding stations where the feeder is positioned near the work area.

Key Features

• 250A rating at 60% duty cycle supports sustained production welding within light to medium-duty applications
• Gas-ported VELOCITY2 contact tips run cooler and are reported to last longer than standard contact tips
• Tool-free, threadless VELOCITY tip design speeds tip changes without additional hardware
• VELOCITY2 front-end consumables are pre-assembled on the gun for immediate use out of the box
• Standard conductor tube 1240-1374 included
• 42 Series conduit liner included

Compatibility

Compatible with wire feeders equipped with a Euro-Kwik style connector. Accepts wire diameters from 0.035 inches to 0.045 inches. Uses VELOCITY2 series front-end consumables and a 42 Series conduit liner.

Installation Notes

Installation should be performed by a qualified welding technician or maintenance professional familiar with GMAW equipment. Disconnect and de-energize the wire feeder before connecting or disconnecting the gun. Verify that the Euro-Kwik connector is fully seated and locked before initiating a weld. Inspect the conduit liner and contact tip for proper seating after assembly to ensure consistent wire feed and arc stability.

Technical Specifications

• Amperage: 250A
• Duty Cycle: 60%
• Cable Length: 15 feet
• Wire Diameter Range: 0.035 to 0.045 inches
• Cooling Type: Air-Cooled
• Connector Style: Euro-Kwik
• Welding Processes: GMAW, FCAW, Aluminum GMAW
• Conductor Tube: 1240-1374 (Standard)
• Conduit Liner: 42 Series
• Weight: 9.54 pounds

Standard Information

• Brand: TWECO
• Manufacturer Part Number: 1023-1288