Ts Brass 001121-45 Spray Valve Spray Face Gray 1.15 Gpm

Product Description

The TS BRASS 001121-45 is a replacement spray face designed for the B-0107 pre-rinse spray valve. It delivers a controlled 1.15 gallons per minute (GPM) flow rate and is rated for operating pressures between 20 psi and 125 psi. The gray finish spray face is DOE 2019 compliant at the Class II efficiency level, making it suitable for commercial foodservice installations where energy and water conservation codes apply. This component is typically installed or replaced by a licensed plumber or qualified commercial kitchen equipment technician during routine maintenance or when a spray face becomes worn or clogged.

This spray face is intended for use on the TS BRASS B-0107 pre-rinse spray valve in commercial kitchens, cafeterias, and foodservice facilities. It serves as the water-discharge end of the valve assembly, directing flow for dish and pot rinsing operations. The 1.15 GPM rating meets current DOE Class II standards for commercial pre-rinse spray valves, supporting compliance with water efficiency requirements in commercial installations.

Key Features

• 1.15 GPM flow rate meets 2019 DOE Class II compliance for commercial pre-rinse spray valves
• Rated for operating pressures from 20 psi to 125 psi
• Temperature range of 40 degrees F to 140 degrees F supports hot and cold rinse applications
• Gray finish spray face for visual identification and compatibility with the B-0107 valve body
• Replacement-only component for targeted maintenance without full valve replacement

Compatibility

Designed as a direct replacement spray face for the TS BRASS B-0107 pre-rinse spray valve assembly.

Installation Notes

Installation and replacement should be performed by a licensed plumber or qualified technician familiar with commercial foodservice plumbing. Shut off the water supply to the pre-rinse unit before disassembling the spray valve. Follow applicable local plumbing codes and the valve manufacturer instructions when seating and securing the spray face. Do not overtighten the spray face, as this can damage the valve body or spray face threads.

Technical Specifications

• Flow Rate: 1.15 GPM
• Minimum Pressure: 20 psi
• Maximum Pressure: 125 psi
• Minimum Temperature: 40 degrees F
• Maximum Temperature: 140 degrees F
• Color: Gray
• DOE Compliance: 2019 Class II

Standard Information

• Brand: TS BRASS
• Manufacturer Part Number: 001121-45