Tru-maxx AC411JFE220G Sanding Sheet 220 Grit Aluminum Oxide

Product Description

The TRU-MAXX AC411JFE220G is a coated abrasive sanding sheet designed for dry material removal on wood, metal, and composite surfaces. It uses aluminum oxide grain on a J-weight cloth backing with a closed coat density, delivering consistent cutting action across the full sheet surface. At 220 grit, this sheet falls in the medium grade range, making it well suited for surface preparation, finish sanding, and between-coat smoothing. Each sheet measures 9 inches wide by 11 inches long and weighs approximately 0.06 pounds. Licensed trades and fabrication shops alike reach for this format when hand sanding or wrapping a block for flat work.

This sanding sheet is used in woodworking, metal fabrication, automotive bodywork prep, and general surface conditioning applications. The J-weight cloth backing provides flexibility, allowing the sheet to conform to contoured surfaces without tearing. The closed coat construction maximizes grain coverage for faster stock removal per pass. It is rated for dry use only and is not load resistant, meaning it is best suited for clean, light-to-medium material removal rather than heavily gumming materials like soft pine or uncured fillers.

Key Features

• 220 grit aluminum oxide abrasive for medium-grade surface preparation and finish sanding
• J-weight cloth backing offers flexibility for flat and contoured work
• Closed coat density provides maximum abrasive coverage per square inch
• Dry-use rated construction suitable for wood, metal, and composite surfaces
• Standard 9 inch by 11 inch sheet size fits hand blocks and most sheet holders

Compatibility

Designed as a standard 9 inch by 11 inch abrasive sheet compatible with hand sanding blocks and power sanders that accept full-sheet or cut-sheet formats of that size.

Installation Notes

Sanding sheets are installed by hand or secured to a sanding block or orbital sheet sander. Ensure the sheet is fully seated and tensioned before use to prevent slipping during operation. Wear appropriate respiratory protection when dry sanding, as fine abrasive dust poses an inhalation hazard. Inspect the sheet for loading or worn grain and replace when cutting action diminishes noticeably.