Tru-maxx 7316 Abrasive Belt 100 Grit 6x48 in Aluminum Oxide

Product Description

The TRU-MAXX 7316 is a coated abrasive belt designed for dry grinding, blending, and finishing operations on stationary or portable belt sanders. It measures 6 inches wide by 48 inches long and cuts with 100-grit aluminum oxide abrasive, placing it in the fine-grade range. The closed-coat construction packs abrasive grain across the full surface area, delivering consistent stock removal and a uniform finish. The polyester cloth backing with an X-weight designation resists tearing and flexing under sustained load. Metalworkers, fabricators, and industrial maintenance technicians are the primary users of this belt size and grit combination.

This belt fits standard 6 x 48 inch belt sander machines used in metal fabrication shops, maintenance facilities, and production grinding applications. At 100 grit, it is well suited for finish work after coarser stock removal passes, light deburring, weld blending, and surface prep on ferrous and non-ferrous metals. The aluminum oxide abrasive material handles steel and other hard metals effectively in dry-use environments. This belt is sold individually and is intended for single-use replacement on machines accepting the 6 x 48 inch belt format.

Key Features

• 100-grit aluminum oxide abrasive for fine-grade dry grinding and finishing
• Closed-coat construction for consistent abrasive density and uniform surface contact
• X-weight polyester cloth backing resists tearing and flex fatigue during heavy use
• Dry-use rated — not intended for wet grinding operations
• Standard 6 x 48 inch dimensions fit common stationary and portable belt sanders

Compatibility

Designed as a replacement abrasive belt for belt sander machines that accept a 6 x 48 inch belt format in dry-use grinding and finishing applications.

Installation Notes

Belt sander replacement is typically performed by maintenance personnel or machine operators following the equipment manufacturer's belt-change procedure. Power down and de-energize the machine before replacing the belt. Verify tracking adjustment after installation and run the machine briefly at low load to confirm the belt seats and tracks correctly before resuming production. Inspect the platen and contact wheel for wear before installing a new belt.