Tru-maxx 7264 Abrasive Belt 60 Grit 4x24 in Aluminum Oxide

Product Description

The TRU-MAXX 7264 is a coated abrasive belt engineered for dry sanding and material removal on belt sanders and stationary finishing machines. Built with aluminum oxide abrasive on a polyester cloth backing with an X-weight designation, this belt delivers consistent cut and durability across aggressive stock removal tasks. At 60 grit, it falls in the medium grade range, making it well-suited for leveling surfaces, removing mill scale, deburring metal, or shaping wood prior to finer finishing steps. The closed coat density ensures maximum abrasive coverage for efficient, fast cutting action. It weighs approximately 0.17 pounds per belt.

This belt is sized at 4 inches wide by 24 inches long, fitting bench-top and floor-standing belt sander models that accept standard 4 x 24 inch belts. It is appropriate for use in fabrication shops, machine shops, woodworking environments, and maintenance facilities. Typical users include machinists, metal fabricators, carpenters, and general maintenance technicians performing surface prep, weld blending, or aggressive material removal. The dry-only rating means it should not be used with water, cutting fluids, or lubricants.

Key Features

• 60 grit medium grade for aggressive stock removal and surface leveling
• Aluminum oxide abrasive material for reliable performance on metal, wood, and composites
• Polyester cloth backing with X-weight rating provides strength and flexibility under load
• Closed coat density maximizes abrasive surface area for fast, consistent cutting
• Dry-use rating — compatible with standard dry belt sander applications
• Standard 4 x 24 inch size fits a wide range of common belt sander configurations

Compatibility

Designed for use with belt sanders that accept a 4 x 24 inch abrasive belt. Confirm your machine accepts this belt length and width before installation.

Installation Notes

Disconnect or unplug the belt sander from its power source before changing the belt. Verify belt tracking direction — most belts have a recommended run direction indicated by an arrow on the inside of the belt. Seat the belt firmly on the platen and tracking rollers, then restore power and check tracking before applying the belt to a workpiece. Wear appropriate PPE including eye protection and a dust mask during operation.