Tru-maxx 66261114902 Deburring Wheel 8 in Aluminum Oxide

Product Description

The TRU-MAXX 66261114902 is a convolute deburring wheel designed for use on bench grinders in industrial and maintenance shop environments. Built with aluminum oxide abrasive at a soft density grade 5, this wheel removes burrs, sharp edges, and surface irregularities from metal workpieces without aggressive stock removal. It measures 8 inches in diameter with a 2-inch face width and a 3-inch center hole, making it a standard fit for most bench grinder arbor configurations. Rated to 4,500 RPM, it suits typical bench grinder operating speeds. Machinists, tool and die technicians, and fabrication shop workers are the primary installers and users of this type of wheel.

This deburring wheel is used in bench grinder applications for edge finishing, light surface blending, and part deburring on ferrous and non-ferrous metals. The convolute construction compresses layers of abrasive-impregnated material into a dense, uniform wheel form, which delivers consistent cut and finish across the face. The coarse grade with soft density combination allows effective material removal while conforming slightly to part geometry. It is well suited to production and maintenance environments where parts require consistent edge conditioning before assembly or inspection.

Key Features

• Aluminum oxide abrasive for effective burr removal on metal workpieces
• Convolute wheel construction delivers uniform abrasive density across the full face width
• Soft density grade 5 allows slight compliance to part contours during finishing
• 4,500 RPM maximum speed rating matches standard bench grinder operating ranges
• 8-inch diameter with 2-inch face width provides a broad working surface for edge conditioning
• 3-inch center hole fits common bench grinder arbor sizes

Compatibility

Designed for use with bench grinders. No specific brand or model compatibility data was provided by the manufacturer for this part.

Installation Notes

This wheel should be installed and operated by qualified shop personnel familiar with abrasive wheel safety. Always power down and de-energize the bench grinder completely before mounting or removing any wheel. Verify that the grinder spindle speed does not exceed the 4,500 RPM maximum rating of this wheel before operation. Inspect the wheel for cracks or damage before each use and follow ANSI B7.1 safety guidelines for abrasive wheel mounting and guarding.