Tru-maxx 66261114606 Deburring Wheel 6 in Silicon Carbide

Product Description

The TRU-MAXX 66261114606 is a convolute deburring wheel built for edge finishing, burr removal, and surface blending on metal workpieces. It measures 6 inches in diameter with a 0.5 inch face width and a 1 inch center hole. The abrasive material is silicon carbide in a hard density grade 8 construction, rated for a maximum of 4,500 RPM. Machinists, tool-and-die workers, and fabrication shops use this wheel for consistent, controlled deburring on bench grinders. The convolute construction holds abrasive grain throughout the wheel body, so cutting performance stays uniform as the wheel wears down.

This wheel is intended for bench grinder applications in metalworking environments, including production shops, maintenance facilities, and fabrication operations. It is compatible with mandrel and adapter sizes 3 and 5, making it straightforward to mount on standard bench grinder arbors. The fine silicon carbide grade is well-suited for finishing passes on ferrous and non-ferrous metals where a smooth, consistent edge is required after machining or cutting operations.

Key Features

• Silicon carbide abrasive in a hard, density 8 convolute construction for consistent stock removal
• 6 inch diameter with a 0.5 inch face width provides a focused contact zone for edge work
• 1 inch center hole fits standard bench grinder arbors with mandrel or adapter sizes 3 and 5
• Rated to 4,500 RPM for safe use on typical bench grinder speeds
• Fine grade abrasive delivers smooth finishing results on metal edges and surfaces
• Convolute wheel body maintains performance as the wheel wears, extending service life

Compatibility

Compatible with bench grinders using mandrel or adapter sizes 3 and 5. Designed as an OEM-style replacement or direct-fit deburring wheel for standard bench grinder setups requiring a 6 inch convolute wheel with a 1 inch arbor hole.

Installation Notes

Installation should be performed by a qualified machinist or shop technician with the bench grinder fully powered down and unplugged before mounting. Verify that the grinder spindle speed does not exceed the 4,500 RPM maximum rating of this wheel before operation. Inspect the wheel for cracks or damage before mounting and use the appropriate mandrel or adapter size to secure the wheel properly on the arbor. Always operate bench grinders with guards in place in accordance with applicable shop safety standards and OSHA grinding equipment guidelines.