Tru-maxx 66261114589 Deburring Wheel 8 Inch Silicon Carbide

Product Description

The TRU-MAXX 66261114589 is a convolute deburring wheel designed for use on bench grinders in metal fabrication and finishing applications. Built with silicon carbide abrasive at a density of 6 and a soft density grade with fine grit, this wheel removes burrs, sharp edges, and surface irregularities from ferrous and non-ferrous workpieces. It measures 8 inches in diameter with a 1-inch face width and a 3-inch center hole, making it a substantial wheel suited for production and shop environments. Rated to a maximum of 3,400 RPM, it delivers consistent material removal without aggressive stock loss.

This deburring wheel is intended for bench grinder installations in machine shops, fabrication facilities, and maintenance departments where consistent edge conditioning and surface prep are required. The convolute construction compresses and releases during contact, allowing the abrasive to conform to part geometry and produce a uniform finish. Typical users include machinists, tool and die technicians, and maintenance professionals who need repeatable deburring results on metal components.

Key Features

• Silicon carbide abrasive material suited for deburring non-ferrous metals, cast iron, and hard-to-grind materials
• Density 6 soft grade provides controlled cut rate with fine finishing action
• Convolute wheel construction allows abrasive to conform to part contours during operation
• 3,400 RPM maximum speed rating for standard bench grinder use
• 8-inch diameter with 1-inch face width and 3-inch center hole for direct arbor mounting

Compatibility

Designed for use with bench grinders accepting a 3-inch arbor hole and operating at or below 3,400 RPM.

Installation Notes

Installation should be performed by a qualified machinist or shop technician familiar with abrasive wheel mounting procedures. Always power down and lock out the bench grinder before mounting or removing the wheel. Verify that the grinder spindle speed does not exceed the 3,400 RPM maximum rating stamped or listed on the wheel. Inspect the wheel for cracks or damage before each use and never force the wheel onto the arbor.