Tru-maxx 66261114541 Convolute Deburring Wheel 12 in

Product Description

The TRU-MAXX 66261114541 is a convolute deburring wheel designed for use on bench grinders in metal fabrication and finishing applications. Built with aluminum oxide abrasive at a density of 5 and a soft density grade, this wheel removes burrs, sharp edges, and surface scale from metal workpieces without aggressive stock removal. The 12-inch diameter and 1-inch face width suit standard bench grinder setups, and the 5-inch center hole accommodates common arbor configurations. Rated to 3,000 RPM, it is intended for controlled, consistent deburring passes by machinists, fabricators, and maintenance technicians working with steel and ferrous metals.

This convolute wheel is suited for bench grinder-mounted deburring operations in job shops, production facilities, and maintenance environments. Its medium abrasive grade and soft density make it appropriate for finish deburring and edge blending on machined or fabricated parts where light to moderate material removal is required. The convolute construction delivers consistent cut throughout the life of the wheel, unlike surface conditioning discs that wear unevenly. It is a direct fit for bench grinders that accept a 5-inch arbor hole and can spin a 12-inch diameter wheel within manufacturer-rated RPM limits.

Key Features

• Aluminum oxide abrasive material for effective deburring on ferrous metals
• Density 5, soft density grade for controlled edge blending without aggressive stock removal
• Convolute construction provides consistent abrasive action through the full wheel life
• 12-inch diameter with 1-inch face width fits standard bench grinder configurations
• 5-inch center hole accommodates common bench grinder arbors
• 3,000 RPM maximum speed rating for safe bench grinder operation

Compatibility

Designed for use with bench grinders that accept a 12-inch diameter wheel with a 5-inch center hole and operate within a 3,000 RPM maximum speed rating.

Installation Notes

Installation should be performed by a qualified technician following the grinder manufacturer's mounting instructions. Always power down and lock out the bench grinder before mounting or removing the wheel. Verify that the grinder's rated spindle speed does not exceed the 3,000 RPM maximum rating of this wheel before operation. Inspect the wheel for damage before each use and confirm the arbor hole fits without forcing.