Tru-maxx 66261109849 Deburring Wheel 3 in Aluminum Oxide

Product Description

The TRU-MAXX 66261109849 is a unitized deburring wheel designed for light material removal, edge finishing, and surface blending on metal workpieces. Built around an aluminum oxide abrasive matrix, this wheel carries a density rating of 5 and a fine grade designation, making it well suited for controlled deburring passes where surface integrity matters. At a 3-inch diameter with a 0.25-inch face width, it mounts on a 0.25-inch center hole arbor and spins safely up to 15,100 RPM. Machinists, fabricators, and metal finishing technicians reach for this wheel type when removing burrs from drilled, milled, or punched parts without aggressive stock removal.

This wheel is intended for use with die grinders in metal fabrication, machine shop, and general industrial maintenance environments. The unitized construction keeps abrasive grains bound in a non-woven fiber matrix, which allows the wheel to conform slightly to part geometry and produce a consistent finish on inside edges, slots, and contoured surfaces. It is appropriate for ferrous and non-ferrous metals and fits standard die grinder tooling commonly found in production and repair settings.

Key Features

• Aluminum oxide abrasive material for reliable edge deburring on metal
• Density 5, fine grade unitized construction for controlled, consistent material removal
• 3-inch wheel diameter with 0.25-inch face width and 0.25-inch center hole
• Rated to 15,100 RPM maximum operating speed
• Compatible with die grinder tooling

Compatibility

Designed for use with die grinders accepting a 0.25-inch arbor. No additional specific model compatibility data was provided in the product listing.

Installation Notes

This wheel is installed by qualified machinists or metal fabricators using standard die grinder tooling. Before mounting, confirm the tool spindle speed does not exceed the 15,100 RPM maximum rating marked on the wheel. Always inspect the wheel for damage before use and ensure the arbor nut is properly secured. Wear appropriate eye and face protection per ANSI B11 and shop safety requirements during operation.