Tru-maxx 66253292115 Mounted Point W197 60 Grit 2in

Product Description

The TRU-MAXX 66253292115 is an aluminum oxide mounted point designed for precision grinding, deburring, and surface finishing on ferrous and non-ferrous metals. It features a W197 cylinder shape, 60 grit abrasive, and a medium grade bond that balances stock removal with surface finish quality. The 1/4 inch shank fits standard die grinders and rotary tools, and the 1-1/2 inch shank length provides adequate reach for recessed or contoured work areas. Rated to 19,100 RPM, it handles high-speed grinding without compromising abrasive integrity. Machinists, toolmakers, and maintenance technicians reach for this style of mounted point when working in bores, cavities, and hard-to-reach weld zones.

This mounted point is suited for use in machine shops, fabrication facilities, and industrial maintenance environments. The cylinder profile makes it effective for flat-bottom grinding in slots and pockets, cleaning up weld beads inside pipe joints, and blending surfaces inside formed metal parts. It is compatible with any die grinder or rotary tool equipped with a standard 1/4 inch collet. The medium grit and aluminum oxide construction make it a practical choice for general-purpose metal conditioning where aggressive stock removal is not the primary goal.

Key Features

• W197 cylinder shape provides consistent flat-face contact for slot and pocket grinding
• 60 grit, medium grade aluminum oxide abrasive balances cut rate and surface finish
• 1/4 inch shank diameter fits standard die grinder and rotary tool collets
• 19,100 RPM maximum speed rating supports high-speed rotary tool operation
• 1-1/2 inch shank length offers reach into recessed and contoured work areas
• Blue aluminum oxide abrasive grain is suited for general-purpose metal grinding

Compatibility

Designed for use with die grinders and rotary tools fitted with a standard 1/4 inch collet. Suitable for general-purpose grinding and deburring on steel, cast iron, and non-ferrous metals.

Installation Notes

Mounted points must be installed in a collet that matches the shank diameter exactly — a worn or incorrect collet can cause runout and premature abrasive failure. Always confirm the tool spindle speed does not exceed the 19,100 RPM maximum rating before operation. Inspect the mounted point for cracks or chips before each use and discard any damaged units. Wear appropriate eye protection and follow ANSI B11 or equivalent shop safety standards when operating rotary abrasive tooling.