Tru-maxx 66253291552 Mounted Point 60 Grit 1/4 in Shank

Product Description

The TRU-MAXX 66253291552 is an aluminum oxide mounted point designed for precision grinding, deburring, and surface finishing on metal workpieces. This flat cone profile (shape code A34) operates at up to 25,460 RPM and delivers consistent material removal at 60 grit with a medium grade. The vitrified bond holds abrasive grains firmly during aggressive grinding cycles, making it well suited for die grinders and rotary tool applications. The 1/4 inch shank diameter fits standard collets across most handheld and bench-mounted rotary tools. This type of mounted point is typically installed and used by machinists, tool and die makers, maintenance technicians, and fabrication professionals.

This mounted point is used in metalworking, mold finishing, weld cleanup, and general surface conditioning applications. The flat cone geometry allows access to contoured surfaces, inside radii, and tight cavities where flat wheels cannot reach. At 60 grit medium grade, it removes material efficiently without excessive surface roughness, making it appropriate for intermediate stock removal before finishing passes. It is commonly used in both production shop and maintenance repair environments on ferrous and non-ferrous metals.

Key Features

• Flat cone shape (A34) accesses contoured surfaces, inside angles, and cavities
• 60 grit medium grade balances stock removal rate with surface finish quality
• Aluminum oxide abrasive handles ferrous metals and general-purpose grinding tasks
• Vitrified bond provides rigidity and consistent grain exposure throughout wheel life
• Rated to 25,460 RPM for use with standard die grinders and rotary tools
• 1/4 inch shank diameter fits most standard collets without an adapter

Compatibility

Designed as a direct-fit mounted point for die grinders, rotary tools, and spindles accepting a 1/4 inch shank collet. Verify the tool RPM rating meets or exceeds 25,460 RPM before use.

Installation Notes

Mounted points must be installed by personnel familiar with abrasive tool safety and applicable ANSI B11 or OSHA abrasive wheel standards. Inspect the point for cracks or chips before each use and never exceed the maximum rated RPM of 25,460. Power down and disconnect the tool from its power source before inserting or removing the mounted point from the collet. Use appropriate eye protection and guarding during operation.