Tru-maxx 66253255195 Grinding Wheel 12in 60 Grit Silicon Carbide

Product Description

The TRU-MAXX 66253255195 is a Type 1 bench and pedestal grinding wheel designed for material removal and tool sharpening on stationary grinder setups. Built from green silicon carbide with a vitrified bond, this wheel handles hard, brittle materials such as carbide tooling, ceramic, and cast iron. At 12 inches in diameter and 2 inches thick, it delivers a wide grinding face suitable for larger workpieces. The 60-grit, medium-grade abrasive with a grain structure rating of 8 provides controlled stock removal with a consistent finish. Rated at a maximum of 2705 RPM, it is sized for industrial bench and pedestal grinders found in machine shops and maintenance facilities.

This wheel is suited for ferrous and non-ferrous grinding applications where silicon carbide abrasive is preferred over aluminum oxide. Typical uses include sharpening carbide-tipped tools, grinding non-ferrous metals, and dressing hard materials. The 1-1/4 inch arbor hole fits standard bench and pedestal grinder spindles. Installation requires a licensed machinist or experienced maintenance technician working with stationary grinding equipment. No bushing is included with this wheel.

Key Features

• Green silicon carbide abrasive for hard and brittle material grinding
• Vitrified bond construction provides rigidity and consistent cut rate
• 60-grit medium grade with grain structure 8 for controlled stock removal
• Semi-friable abrasive continually exposes fresh cutting edges during use
• Non-porous structure for predictable performance on high-hardness materials
• Maximum 2705 RPM rating for safe operation on standard bench and pedestal grinders

Compatibility

Designed as an OEM-style replacement or direct-fit wheel for standard bench and pedestal grinders with a 1-1/4 inch arbor spindle accommodating a 12 inch Type 1 grinding wheel.

Installation Notes

Installation should be performed by a qualified machinist or maintenance technician. Always power down and lock out the grinder before mounting or removing a wheel. Inspect the wheel for cracks or chips before installation and perform a ring test per ANSI B7.1 safety standards. Do not exceed the maximum rated RPM of the grinder or the wheel, whichever is lower.