Trane TTA12044CAAE02P Condensing Unit 10 Ton 460V 3ph

Product Description

The TRANE TTA12044CAAE02P is a commercial air cooled condensing unit rated at 10 tons of cooling capacity and designed for three-phase electrical service at 460 volts. This type of equipment serves as the outdoor refrigeration circuit component in a split or applied commercial HVAC system, housing the compressor, condenser coil, and condenser fan section. It is installed and serviced by licensed commercial HVAC technicians and is typically paired with a separate indoor evaporator coil or air handler to complete the refrigerant circuit. At 10 tons, this unit is sized for light commercial or large residential applications where significant cooling capacity is required.

The TTA12044CAAE02P is suited for commercial cooling installations where three-phase 460-volt power infrastructure is available, such as small office buildings, retail spaces, light industrial facilities, and multi-zone commercial environments. The unit operates as the condensing side of a split cooling system, rejecting heat from the refrigerant circuit to the outdoor air. Installation is performed outdoors, typically at grade level or on a rooftop pad, and requires proper electrical service, refrigerant line set connections, and commissioning by a certified technician.

Key Features

• 10-ton cooling capacity suitable for light commercial and large-scale residential applications
• Three-phase 460-volt electrical configuration for commercial power infrastructure
• Air cooled condenser design rejects heat to outdoor ambient air without water-side infrastructure
• Designed as an outdoor condensing unit for split-system cooling configurations

Compatibility

Designed as an OEM commercial condensing unit intended for use in split-system or applied commercial cooling configurations requiring 10-ton capacity at 460V three-phase power supply.

Installation Notes

Installation must be performed by a licensed HVAC technician holding the appropriate EPA Section 608 refrigerant handling certification. Disconnect and lock out all electrical power at the service panel before making any electrical or refrigerant connections. The unit should be mounted on a level, structurally sound pad with adequate clearance on all sides per the manufacturer installation instructions and local mechanical codes. Refrigerant system startup and charging must be completed according to applicable equipment documentation and local regulations.

Technical Specifications

• Unit Type: Cooling
• Cooling Capacity: 10 tons
• Voltage: 460 volts
• Phase: 3-phase

Standard Information

• Brand: TRANE
• Manufacturer Part Number: TTA12044CAAE02P