Tool-flo 563631RAC50C Grooving Insert AC50 Solid Carbide

Product Description

The TOOL-FLO 563631RAC50C is a solid carbide grooving insert designed for precision grooving operations on steel workpieces. Manufactured to the FLG-3031R ISO code and classified under the Flo-Lock series, this insert features an AlTiN coating applied via PVD process, delivering elevated heat and wear resistance at the cutting edge. It carries a manufacturer grade of AC50 and a material grade of C5/C6, making it well suited for demanding turning and grooving applications. The insert is double-ended, right-hand orientation, with a neutral rake angle of 0 degrees. Licensed machinists and CNC operators working in production and job-shop environments are the primary installers of this tooling.

This insert is intended for use in steel turning and grooving applications where tight dimensional control is required. The Flo-Lock series is designed for use with clamp-style insert holders compatible with FLG-style inserts. The 0.375 inch gage diameter and 0.031 inch cutting width make this insert appropriate for narrow groove profiles and fine detail work. It is suited for both production turning centers and manual lathes where clamp-style insert retention is used.

Key Features

• Solid carbide construction with AC50 manufacturer grade and C5/C6 material grade for durability in steel cutting
• AlTiN coating applied via PVD process for enhanced thermal resistance and extended tool life
• 0.031 inch cutting width with a maximum depth of cut of 0.05 inches
• Double-ended insert geometry maximizes usable cutting edges per insert
• Corner radius range of 0.002 to 0.010 inches for controlled edge profile on groove sidewalls
• Neutral rake angle with a 3-degree lead angle for stable chip formation

Compatibility

Designed for use with clamp-style FLG insert holders accepting FLG-3031R style inserts in the Flo-Lock series. No additional specific compatible model numbers were provided in the product data.

Installation Notes

Installation should be performed by a qualified machinist or CNC tooling technician. The machine spindle must be fully stopped and the machine placed in a locked-out, de-energized state before seating or replacing inserts. Use the appropriate clamp torque tool for the holder manufacturer's specified clamping hardware. Inspect the insert pocket and clamp for chips or debris before seating to ensure proper insert support and prevent premature breakage.