Toa bs-1030w Indoor Outdoor Loudspeaker 90W White

Product Description

The TOA bs-1030w is a passive surface-mount loudspeaker designed for 70.7-volt and 100-volt distributed audio systems. It combines a 4.7-inch (120mm) dynamic cone woofer with a 1-inch (25mm) balanced dome tweeter, crossed over at 4 kHz, to deliver a frequency response of 80 Hz to 20 kHz. Rated at 90 watts power capacity with a nominal sensitivity of 90 dB, the bs-1030w suits background music and paging installations where consistent, intelligible audio coverage is required. A built-in transformer allows impedance adjustment from the standard 8 ohms to match the distribution line. Licensed audio contractors and commercial AV integrators typically handle specification and installation of this unit.

The bs-1030w is intended for background music and paging applications in schools, hospitals, restaurants, offices, and similar commercial or institutional venues. Its IP-X4 weather-resistant rating and UV-resistant ABS resin enclosure with steel mesh grille make it suitable for both indoor and outdoor deployment, including covered walkways, building entries, patios, and interior common areas. The speaker terminal input accepts standard distributed-audio wiring, making it a straightforward fit for new construction and retrofit projects on 70.7-volt or 100-volt constant-voltage systems.

Key Features

• Passive design with built-in transformer for 70.7-volt and 100-volt distributed audio lines; impedance adjustable from 8 ohms
• 4.7-inch (120mm) dynamic cone woofer and 1-inch (25mm) balanced dome tweeter with 4 kHz crossover
• 90W power capacity and 90 dB nominal sensitivity for reliable coverage in mid-sized spaces
• IP-X4 weather-resistant rating suitable for outdoor and high-humidity environments
• UV-resistant ABS resin enclosure with steel mesh grille for long-term durability in sun-exposed locations
• Surface-mount form factor supports fast installation on walls or ceilings

Compatibility

Designed for use on 70.7-volt and 100-volt constant-voltage distributed audio systems typical of commercial paging and background music installations.

Installation Notes

Installation is typically performed by a licensed audio contractor or low-voltage systems integrator familiar with distributed speaker systems and applicable local codes. De-energize the amplifier and verify zero voltage on the distribution line before making any wiring connections at the speaker terminal. The surface-mount enclosure should be secured to a structurally sound wall or ceiling substrate using fasteners appropriate for the mounting surface material. For outdoor placements, verify that all conduit entries and wire terminations are sealed to maintain the IP-X4 environmental rating.