Titan Usa TE63429 Roughing End Mill 1/2 Inch 4 Flute Carbide

Product Description

The TITAN USA TE63429 is a solid carbide roughing end mill designed for aggressive material removal in milling operations. Built with a 4-flute, coarse-pitch geometry and a 30-degree helix angle, it delivers efficient chip evacuation and reduced cutting forces during heavy roughing passes. The mill diameter is 0.5 inches with a matching 0.5-inch straight cylindrical shank, and the length of cut is 1.25 inches. It is a single-end, right-hand cutting tool with left-hand flute direction and an upcut flute type, making it suited for conventional roughing strategies. The bright, uncoated finish is suitable for use with cutting fluids across a range of ferrous and non-ferrous workpiece materials. Machinists and CNC operators install this tool in standard end mill holders or collet chucks on vertical and horizontal machining centers.

The TE63429 is intended for general-purpose roughing applications on machining centers and manual mills. Its coarse-pitch chipbreaker-free geometry and solid carbide construction make it a practical choice for hogging stock from steel, cast iron, aluminum, and similar materials in job shop and production environments. The center-cutting capability allows plunge entry, giving the operator flexibility in toolpath programming without requiring a pre-drilled entry point.

Key Features

• Solid carbide construction for rigidity and wear resistance in demanding roughing cuts
• 4-flute coarse-pitch geometry promotes efficient chip evacuation and reduced heat buildup
• 30-degree helix angle balances cutting force and chip flow in general-purpose applications
• Center-cutting design allows direct plunge entry into the workpiece
• Right-hand cut with left-hand flute direction and upcut flute type
• Bright, uncoated finish compatible with standard cutting fluids and lubricants
• Single-end configuration with straight cylindrical shank for broad holder compatibility

Compatibility

Designed as a general-purpose roughing end mill compatible with standard 1/2-inch end mill holders, ER collet chucks, and weldon-flat holders used on vertical machining centers, horizontal machining centers, and manual knee mills.

Installation Notes

Installation should be performed by a qualified machinist or CNC operator with the machine in an E-stop or powered-down state before tool changes. Ensure the shank is clean and fully seated to the recommended engagement depth in the holder before torquing the retention screw or collet nut. Verify runout with a dial indicator after installation, as excessive runout reduces tool life in roughing applications. Follow machine tool manufacturer guidelines and applicable shop safety procedures when setting feeds, speeds, and depth of cut.