Titan Usa TC57607 Square End Mill 0.1 in 3 Flute Carbide

Product Description

The TITAN USA TC57607 is a solid carbide square end mill designed for precision milling in metalworking and machining applications. It features a 0.1-inch cutting diameter with a 0.3-inch length of cut and a 3-flute geometry that balances chip evacuation with surface finish quality. The 30-degree helix angle promotes smooth cutting action and reduces chatter. The bright, uncoated finish makes it suitable for a wide range of general-purpose milling tasks. With a micrograin carbide construction, this end mill delivers consistent edge retention across ferrous and non-ferrous materials. It is installed and operated by machinists and CNC programmers in production and job-shop environments.

This end mill is well suited for slotting, profiling, and peripheral milling passes where a small-diameter tool is required. The extended reach configuration, with a 0.5-inch reach length, allows access to areas where clearance is limited. The right-hand cut and right-hand flute direction are standard for conventional CNC milling setups. The single-end design and 0.125-inch shank diameter accommodate standard collet and end mill holders commonly found on CNC machining centers and manual mills. Upcut flute geometry assists with chip removal during climb and conventional milling passes.

Key Features

• 0.1-inch cutting diameter with 0.3-inch length of cut for small-feature milling
• 3-flute solid micrograin carbide construction for edge retention and rigidity
• 30-degree helix angle reduces cutting forces and chatter
• Extended reach with 0.5-inch reach length for restricted-access operations
• Right-hand cut, right-hand flute, upcut geometry — standard CNC compatibility
• Bright, uncoated finish suitable for general-purpose ferrous and non-ferrous milling

Compatibility

Designed for use in standard CNC machining centers and manual milling machines equipped with collet systems or end mill holders accepting a 0.125-inch shank diameter.

Installation Notes

Installation should be performed by a qualified machinist. Ensure the spindle is fully powered down and locked out before changing tooling. Seat the shank fully and evenly in the collet or holder to the recommended engagement depth before tightening to the tool holder specification. Verify runout with a dial indicator after installation, as excessive runout at this diameter will significantly reduce tool life.