Titan Usa TC56059 Square End Mill 0.059in 2 Flute Carbide

Product Description

The TITAN USA TC56059 is a solid carbide square end mill designed for precision milling operations in metal, composites, and engineered plastics. With a 0.0590-inch cutting diameter and a 0.177-inch length of cut, this tool is suited for fine detail work, slot milling, and profiling in tight geometries. The micrograin carbide substrate provides wear resistance and edge retention at small diameters where tool deflection and breakage are primary concerns. It runs a 30-degree helix angle with an upcut, right-hand flute configuration and is centercutting, allowing plunge entry. Installed on CNC machining centers or manual mills, it is a go-to tool for machinists working at or near 1.5 mm scale features.

This end mill is intended for use in applications requiring small-diameter precision cutting, including mold and die work, medical component machining, electronics enclosures, and aerospace detail parts. The 0.125-inch (1/8-inch) shank fits standard collets and toolholders common to both full-size and compact CNC platforms. The bright, uncoated finish makes it suitable for a broad range of workpiece materials where coating interaction with the material is a concern, and it pairs well with flood coolant or mist cooling setups.

Key Features

• 0.0590-inch cutting diameter for fine-feature and small-slot milling
• Micrograin solid carbide construction for edge retention and rigidity at small diameters
• 30-degree helix angle with upcut, right-hand flute direction for efficient chip evacuation
• Centercutting geometry allows direct plunge entry without a pre-drilled pilot hole
• Bright, uncoated finish compatible with a wide range of workpiece materials
• 1/8-inch shank diameter fits standard ER collets and toolholders

Compatibility

Designed as an OEM-style replacement or direct-use solid carbide square end mill for CNC machining centers and manual mills accepting a 0.125-inch (1/8-inch) round shank collet or toolholder.

Installation Notes

Installation should be performed by a qualified machinist or CNC operator with the spindle fully stopped and locked out before tool changes. Seat the shank fully into the collet to the recommended minimum engagement depth for the toolholder type in use, and torque the collet nut per the toolholder manufacturer specification. At this diameter, runout control is critical — verify total indicator runout (TIR) after installation before engaging the workpiece. Do not exceed the tool manufacturer recommended speeds and feeds for the workpiece material and depth of cut.