Titan Usa TC29626 Roughing End Mill 3/8 Inch 4 Flute Carbide

Product Description

The TITAN USA TC29626 is a solid carbide roughing end mill designed for aggressive material removal in milling operations. Built with a fine pitch, 4-flute spiral configuration and a 30-degree helix angle, it produces a shearing cut that breaks chips efficiently and reduces chatter during heavy cuts. The AlTiN coating provides high heat resistance, extending tool life in ferrous and hard alloy materials. With a 3/8 inch cutting diameter and 1-1/2 inch length of cut, this tool is sized for general-purpose roughing passes on vertical machining centers, CNC mills, and manual knee mills. Machinists and toolroom operators are the primary end users.

This end mill is suited for general-purpose roughing applications in job shops, production machining environments, and toolroom settings. It handles roughing passes in steel, stainless, cast iron, and similar ferrous materials where the AlTiN coating performs best under elevated cutting temperatures. The square end geometry is appropriate for open-pocket roughing, slotting, and peripheral milling. The single-end, right-hand cut and right-hand flute direction are standard for conventional spindle setups on most CNC and manual milling machines.

Key Features

• Solid carbide construction for rigidity and wear resistance in tough materials
• AlTiN coating extends tool life under high-heat cutting conditions
• Fine pitch roughing geometry breaks chips and reduces cutting forces
• 30-degree helix angle improves shear action and surface finish on roughing passes
• Center-cutting design allows plunge entry without a pre-drilled hole
• Right-hand cut and right-hand flute direction compatible with standard CNC spindle rotation

Compatibility

Designed as a general-purpose roughing end mill for use in standard 3/8 inch tool holders, collets, and end mill adapters on CNC vertical machining centers and manual knee mills with right-hand spindle rotation.

Installation Notes

Installation is performed by a machinist or CNC operator. Power down and lock out the spindle before changing tooling. Seat the shank fully in the collet or tool holder and torque the drawbar or clamping nut per the machine manufacturer specification. Verify runout with a dial indicator after tool changes, as excessive runout accelerates carbide wear and reduces tool life.