Tingley Rubber J53122.SM Class 3 Hi-vis Rain Jacket Small

Product Description

The TINGLEY RUBBER J53122.SM is a Class 3 high-visibility rain jacket constructed from 0.35mm fluorescent lime yellow PVC bonded to a polyester substrate. It is designed for workers operating in high-traffic or low-light environments where ANSI/ISEA 107-1999 compliant rainwear is required. The jacket features 3M Silver Scotchlite reflective trim for 360-degree conspicuity and Therm-O-Rad sealed seams for 100% waterproof protection. Sized for a chest of 36 to 38 inches with a garment chest of 46 inches, a jacket length of 29 inches, and a sleeve length of 33 inches, it suits a wide range of active outdoor work roles.

This jacket is suited for road crews, utility workers, construction personnel, and any trade professional required to meet ANSI Class 3 visibility standards in wet or adverse weather conditions. The J53122.SM pairs directly with the O53122 Class E Overall to form a complete Class 3 compliant suit. Its multi-purpose design makes it appropriate for both residential and commercial jobsite environments where full waterproof coverage and high visibility are mandated simultaneously.

Key Features

• 0.35mm PVC on polyester construction provides durable, 100% waterproof coverage
• Fluorescent lime yellow background material meets ANSI/ISEA 107-1999 Class 3 daytime visibility requirements
• 3M Silver Scotchlite reflective trim delivers 360-degree conspicuity in low-light conditions
• Batwing sleeve construction allows maximum freedom of movement during active work
• Zipper and storm fly front seals out wind, rain, and contaminants; non-conductive hardware throughout
• Roll-A-Way hood stored in collar, full vented cape back, D-ring access for fall protection harness, and Velcro sleeve take-up straps
• Mildew resistant; Therm-O-Rad sealed seams eliminate water infiltration at stitching

Compatibility

The J53122.SM Class 3 jacket is designed to pair with the O53122 Class E Overall to create a complete ANSI/ISEA 107-1999 Class 3 compliant rain suit for worker safety applications.

Installation Notes

This garment is worn PPE and does not require tool-based installation. Inspect all sealed seams and reflective trim before each use to confirm waterproof integrity and visibility compliance. Verify that the D-ring access point is fully unobstructed when connecting to an approved fall protection harness system. Follow applicable site safety and PPE regulations when selecting garment size and class rating for the work environment.