Tigre Usa Inc 1435-007 Poly Fpt Insert Adapter 3/4 Inch

Product Description

The TIGRE USA INC 1435-007 is a 3/4-inch poly female pipe thread (FPT) insert adapter designed for connecting polyethylene (PE) pipe in cold water distribution systems. This plastic-bodied fitting uses a barbed insert design that seats into the ID of PE pipe and is secured with stainless steel clamps. It transitions from the PE pipe's plastic side to a female pipe thread connection on the outlet. Licensed plumbers and irrigation installers working with underground or surface poly-pipe runs will find this adapter a standard component for system connections. The 1435-007 meets ASTM D-2609 requirements and carries NSF 14 and NSF 16 listings for potable water service.

This fitting is intended for residential irrigation, agricultural water lines, and rural water distribution where PE polyethylene pipe is the primary supply line material. It is rated for cold water service only. It must not be used in dwellings, with compressed air, or with any gas service. The FPT outlet allows connection to threaded valves, pressure regulators, or other threaded fittings commonly found in outdoor and underground cold water systems. Package quantity is 25 units per package, making it suitable for larger project or supply-stock purchases.

Key Features

• 3/4-inch female pipe thread (FPT) insert adapter for PE polyethylene pipe
• ASTM D-2609 listed construction for poly insert fittings
• NSF 14 and NSF 16 listed for potable cold water service
• Designed for use with stainless steel clamps to secure PE pipe on barbed insert end
• Cold water service only — not rated for compressed air, gas, or dwelling installation
• Sold in a package of 25 units

Compatibility

Designed for use with PE polyethylene pipe secured by stainless steel clamps in cold water distribution applications conforming to ASTM D-2609 standards. Fitting modifications void the manufacturer warranty.

Installation Notes

Installation of insert fittings into PE pipe is typically performed by licensed plumbers or irrigation technicians following applicable plumbing codes. Shut off the water supply and relieve system pressure before cutting pipe or installing fittings. The barbed insert end must be fully seated into the PE pipe, and appropriately rated stainless steel clamps must be tightened over the pipe at the barbed section to form a leak-free joint. Do not install in dwelling units, do not use with compressed air or gas service, and do not modify the fitting, as any modification voids the warranty.

Technical Specifications

• Size: 3/4 inch
• Connection Type: Plastic Insert x Female Pipe Thread (FPT)
• Material: Plastic (Poly)
• Service: Cold water only
• Certifications: ASTM D-2609, NSF 14, NSF 16
• Weight: 1.5 pounds (per package of 25)
• Package Quantity: 25 units

Standard Information

• Brand: TIGRE USA INC
• Manufacturer Part Number: 1435-007