Tigre Usa Inc 1413-007 Insert Elbow 3/4 Inch Mip

Product Description

The TIGRE USA INC 1413-007 is a 3/4-inch Male Iron Pipe (MIP) insert elbow fitting designed for use with polyethylene (PE) pipe in cold water distribution systems. It connects using an insert-by-male configuration and is secured to PE pipe with stainless steel clamps. This fitting is rated for potable water service under NSF 14 and NSF 16 and meets ASTM D-2609 standards. Plumbers and irrigation professionals install this fitting in residential and light commercial cold water supply lines where a directional change is needed at a male-threaded connection point.

This insert elbow is intended for outdoor and agricultural irrigation, rural water supply, and similar cold water piping applications where polyethylene pipe is the primary distribution material. It is not approved for use in dwellings, and it must not be used with compressed air or any gas service. Install scenarios typically include well water laterals, rural water mains, and irrigation branch lines where PE pipe meets a male-threaded valve, riser, or equipment port.

Key Features

• 3/4-inch MIP insert elbow in a poly construction compatible with PE polyethylene pipe
• Insert x male configuration for transitioning PE pipe to a threaded connection
• Secured with stainless steel clamps for a reliable, leak-resistant joint
• NSF 14 and NSF 16 listed for potable cold water service
• ASTM D-2609 compliant
• Cold water only — not rated for compressed air, gas, or interior dwelling use

Compatibility

Designed for use with PE polyethylene pipe in cold water supply systems. Fitting is not approved for use in dwellings, with compressed air, or with gas service. Fitting modifications void the warranty.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC guidelines. Shut off the water supply and depressurize the line before cutting into any existing PE pipe. Secure the fitting to the PE pipe with appropriately sized stainless steel clamps, torqued per clamp manufacturer guidance. Do not substitute this fitting in applications involving compressed air, gas, or hot water service.