Tigre 4127-007 Cpvc Street 45 Degree Elbow 3/4 Inch

Product Description

The TIGRE 4127-007 is a 3/4-inch CPVC street-pattern 45-degree elbow fitting designed for use in pressure piping systems where a change of direction is required without a separate male adapter. The street configuration features a CTS spigot on one end and a CTS slip socket on the other, allowing it to insert directly into a standard CPVC socket fitting. Manufactured from Schedule 40 CPVC compound meeting ASTM D1784 and D2846 Grade 1 Type 4 requirements, this fitting is fully lead-free and rated for both hot and cold water service. Licensed plumbers and pipefitters install this fitting using solvent cement in accordance with ASTM F493.

This fitting is suited for residential and light commercial plumbing systems, including hot and cold water distribution, irrigation lines, pool and spa piping, and industrial process piping that requires CPVC-compatible connections. The street elbow pattern reduces the number of fittings needed at a directional change, making it useful in tight spaces where a standard elbow-and-adapter combination would be difficult to fit. It is also appropriate for retail and maintenance applications where quick field repairs are common.

Key Features

• Street pattern: CTS spigot x CTS slip end connection for direct socket-to-socket installation
• 45-degree angle for gradual directional changes in piping runs
• Schedule 40 CPVC construction rated for hot and cold water service
• Lead-free material compliant with applicable drinking water standards
• Meets NSF/ANSI 14 and 61G, CSA B137.6, and ASTM D1784/D2846/F493 standards
• 3/4-inch CTS sizing compatible with standard CPVC pipe and fittings

Compatibility

Designed for use with 3/4-inch CTS CPVC pipe and fittings in Schedule 40 pressure piping systems for hot and cold water distribution, irrigation, plumbing, industrial, and pool and spa applications.

Installation Notes

Installation must be performed by a licensed plumber following local plumbing codes and ASTM F493 solvent cementing procedures for CPVC. Shut off and depressurize the water supply line completely before cutting or joining any pipe. Use only CPVC-rated solvent cement and primer; do not substitute PVC cement, as it is not suitable for CPVC. Allow full cure time per the cement manufacturer instructions before pressurizing the system.

Technical Specifications

• Material: CPVC
• Size: 3/4 inch
• Schedule: 40
• Angle: 45 degrees
• End Connection: CTS Spigot x CTS Slip
• Fitting Type: Street Elbow
• Lead-Free: Yes
• Applicable Standards: NSF/ANSI 14/61G, CSA B137.6, ASTM D1784, ASTM D2846, ASTM F493
• Material Specification: Grade 1 Type 4
• Application: Hot and Cold Water Distribution, Irrigation, Plumbing, Industrial, Pool and Spa

Standard Information

• Brand: TIGRE
• Manufacturer Part Number: 4127-007