Tigre 4127-005 Cpvc Street 45 Elbow 1/2 Inch

Product Description

The TIGRE 4127-005 is a 1/2-inch CPVC street-pattern 45-degree elbow designed for hot and cold water distribution, plumbing, irrigation, pool and spa systems, and light industrial piping. It connects a CTS spigot (male) end to a CTS slip (socket) end, allowing a street fitting to mate directly with a standard socket without an additional coupling. The fitting is manufactured from CPVC material to Schedule 40 dimensions and meets lead-free requirements. It carries NSF/ANSI 14 and NSF/ANSI 61G listings along with CSA B137.6 certification, confirming suitability for potable water contact.

This elbow is suited for residential and light commercial applications where a 45-degree directional change is needed in a 1/2-inch CPVC run. Typical installations include domestic hot and cold supply lines, hydronic distribution branches, pool and spa plumbing, and irrigation headers. The street configuration reduces the fitting count in tight spaces by eliminating one socket connection, making it a practical choice in retrofit and repair scenarios where access is limited.

Key Features

• Street-pattern fitting: CTS spigot inlet mates directly into an adjacent socket fitting
• 45-degree angle for gradual directional changes with lower flow restriction than a 90-degree elbow
• CPVC construction rated for both hot and cold potable water service
• Lead-free formulation meets federal and state lead-free plumbing requirements
• NSF/ANSI 14 and NSF/ANSI 61G listed for potable water contact safety
• CSA B137.6 certified; conforms to ASTM D1784, D2846, and F493 Grade 1 Type 4 material specifications

Compatibility

Designed as an OEM-style replacement or new-installation fitting for 1/2-inch CTS CPVC piping systems operating in hot and cold water distribution, plumbing, irrigation, pool and spa, and industrial piping applications built to Schedule 40 standards.

Installation Notes

Installation is performed by a licensed plumber in accordance with the International Plumbing Code and applicable local amendments. Shut off the water supply and relieve system pressure before cutting into any existing line. Solvent-cement the spigot end and slip end using CPVC-rated cement and primer per ASTM F493 procedures; do not use PVC cement, as it is not rated for CPVC. Allow full cure time before restoring pressure.

Technical Specifications

• Material: CPVC
• Size: 1/2 inch
• Schedule: 40
• Angle: 45 degrees
• End Connection: CTS Spigot x CTS Slip
• Fitting Type: Street
• Lead-Free: Yes
• Certifications: NSF/ANSI 14, NSF/ANSI 61G, CSA B137.6
• Material Specification: ASTM D1784 / D2846 / F493 Grade 1 Type 4
• Application: Hot and cold water distribution, irrigation, plumbing, industrial, pool and spa

Standard Information

• Brand: TIGRE
• Manufacturer Part Number: 4127-005