Tigre 2050103 Pvc Pipe 0.75 in X 10 Ft Schedule 40

Product Description

The TIGRE 2050103 is a Schedule 40 PVC pipe in a 3/4-inch nominal diameter by 10-foot length. Schedule 40 PVC is a rigid thermoplastic pipe widely used in residential and light commercial plumbing, irrigation, and low-pressure fluid-handling systems. Its smooth interior bore promotes consistent flow and resists buildup. This pipe is cut, fitted, and solvent-welded by licensed plumbers and pipefitters during new construction and retrofit work. The 3/4-inch nominal size is one of the most common diameters in residential supply and distribution lines.

This pipe is suited for cold and ambient-temperature water distribution, irrigation mainlines, and general low-pressure plumbing applications. Typical installation scenarios include supply branch lines, lawn irrigation systems, and conduit runs where a rigid, solvent-weld-compatible PVC pipe is required. At 10 feet per stick, this length handles standard span runs between fittings without excessive field cutting.

Key Features

• Schedule 40 wall thickness for standard-service pressure ratings
• 3/4-inch nominal diameter suits residential and light commercial distribution lines
• 10-foot length reduces field joints in straight runs
• Solvent-weld compatible for use with standard PVC primers and cements
• Smooth interior bore supports consistent flow with minimal friction loss

Compatibility

Designed as a standard Schedule 40 PVC pipe compatible with 3/4-inch Schedule 40 PVC fittings, couplings, valves, and solvent-weld components meeting ASTM D1785 dimensional standards.

Installation Notes

Installation is typically performed by a licensed plumber in accordance with the applicable International Plumbing Code or local jurisdiction requirements. Shut off the water supply and depressurize the line before cutting or joining. Use appropriate PVC primer and solvent cement rated for Schedule 40 pipe and allow full cure time before pressurizing. Avoid threading Schedule 40 PVC in 3/4-inch diameter without threaded fittings designed for PVC, as direct threading weakens the pipe wall.

Technical Specifications

• Material: PVC
• Nominal Diameter: 0.75 inches
• Schedule: 40
• Length: 10 feet
• Join Method: Solvent Weld

Standard Information

• Brand: TIGRE
• Manufacturer Part Number: 2050103