Thomas Betts MD10M-3 Male Pigtail Connector 600V 1/0 Awg

Product Description

The THOMAS BETTS MD10M-3 is a male pigtail connector rated for 600 volts and compatible with 1/0 AWG wire. It provides a secure, insulated termination point for heavy-gauge conductors in electrical distribution, panel wiring, and industrial wiring applications. The connector features a pink color coding to aid in quick visual identification during installation and inspection. Licensed electricians and electrical contractors install this type of connector where reliable, code-compliant wire terminations are required on large-gauge conductors. At 0.295 pounds, it is a compact, single-piece unit packaged individually for job-site convenience.

This connector is suited for use in commercial and industrial electrical installations where 1/0 AWG conductors require a pigtail-style termination rated to 600 volts. It is appropriate for panel feeders, service entrance wiring, and branch circuit applications that call for a male pigtail configuration. The pink color designation helps technicians distinguish wire gauge groupings at a glance, reducing the risk of mismatched terminations in multi-conductor assemblies.

Key Features

• Rated for 600 volts, suitable for standard commercial and industrial electrical systems
• Compatible with 1/0 AWG wire for heavy-gauge conductor termination
• Male pigtail connector design for straightforward, positive connections
• Pink color coding supports quick visual identification by wire gauge
• Wire strip length of 9/16 inches for consistent, repeatable terminations
• Single-piece package — no additional hardware required

Compatibility

Designed as an OEM-style replacement and general-use male pigtail connector for 1/0 AWG conductors in 600-volt electrical wiring applications.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC). De-energize and lock out the circuit before making any terminations. Strip the conductor to 9/16 inches as specified before seating it into the connector. Verify that the completed termination is fully seated and that no bare conductor is exposed beyond the connector body before re-energizing the circuit.