Thomas Betts L-28-120-9-L Standard Cable Tie 120 Lb 28 in

Product Description

The THOMAS BETTS L-28-120-9-L is a standard-duty nylon cable tie designed for bundling, organizing, and securing wire harnesses and cable runs in electrical, HVAC, and general trade applications. At 28 inches in overall length with a 120 lb tensile strength rating, this tie handles large-diameter bundles and high-load securing tasks without requiring specialty hardware. The natural (off-white) nylon construction resists common shop chemicals and performs reliably at temperatures up to 185 degrees F. Each package contains 50 ties, making it a practical stocking unit for installers and service technicians working in the field or on the bench.

This cable tie is suited for residential and commercial electrical panel work, HVAC equipment wiring, conduit bundle management, and mechanical equipment installations. The 28-inch length accommodates bundle diameters up to 8 inches, covering large wire harnesses, conduit groups, and equipment sub-assemblies. Electricians, HVAC technicians, and low-voltage installers will find this size appropriate for situations where shorter standard ties fall short. The tie is sold in quantities of 50 per package, aligning with typical job-site consumption rates.

Key Features

• 120 lb tensile strength for secure, high-load bundle retention
• 28-inch overall length handles bundles up to 8 inches in diameter
• Natural nylon construction rated to 185 degrees F maximum operating temperature
• 0.075-inch thickness and 0.300-inch width provide a low-profile, consistent cinch
• UL Recognized under File E4905
• Sold in a 50-count package to match field and shop usage needs

Compatibility

Designed as a standard one-piece self-locking nylon cable tie compatible with hand installation or standard cable tie installation tools used across electrical, HVAC, and mechanical trade applications.

Installation Notes

Cable ties of this type are installed by hand or with a tensioning and cut-off tool; using a dedicated tie gun helps achieve consistent tension without over-stressing the locking head. Cut the tail flush to the head after tensioning to eliminate sharp edges that can damage insulation or cause injury. Do not exceed the rated tensile strength or bundle diameter, and avoid routing ties over sharp edges or abrasive surfaces that can nick the nylon strap. NEC guidelines apply when using cable ties in listed electrical assemblies.