Thomas Betts 2574 Liquidtight Straight Cord Grip 2 Npt

Product Description

The THOMAS BETTS 2574 is a straight liquidtight strain relief cord grip designed to secure and protect cables and conductors where they enter liquidtight conduit systems. Built from zinc, this fitting accepts cable diameters from 1.375 to 1.625 inches and threads into a 2-inch NPT fitting with an overall length of 2.625 inches. The liquidtight design maintains a moisture-resistant seal at the point of entry, reducing the risk of water intrusion into the conduit system. Electricians and industrial maintenance technicians install this cord grip in applications where cable protection and strain relief are required at conduit termination points.

This cord grip is suited for use in commercial, industrial, and heavy-duty electrical installations where a 2-inch NPT liquidtight connection is needed. It is a straight-body fitting, making it appropriate for applications where the cable runs directly into the conduit without a bend at the entry point. Typical use cases include motor connections, control panel wiring, and equipment terminations that require a secure, sealed cable entry in wet or damp environments.

Key Features

• Straight conduit body for direct cable entry without bending
• Liquidtight design provides moisture-resistant seal at the cable entry point
• Cable range of 1.375 to 1.625 inches accommodates a variety of cable diameters
• 2-inch NPT thread for compatibility with standard liquidtight fittings
• Zinc construction offers durability in industrial environments
• Overall length of 2.625 inches suits standard panel and enclosure knockouts

Compatibility

Designed as an OEM-style strain relief cord grip for use with 2-inch NPT liquidtight conduit fittings and enclosures requiring cable entry in straight-body configurations.

Installation Notes

Installation should be performed by a licensed electrician in accordance with applicable NEC requirements. De-energize all circuits before beginning work on any conduit termination or panel connection. Thread the fitting into the NPT knockout by hand first to avoid cross-threading, then tighten with the appropriate wrench to achieve a secure, moisture-resistant seal. Verify that the cable diameter falls within the 1.375 to 1.625 inch range before final assembly to ensure proper strain relief and sealing.