Thhncu-generic thhn4/0strgrnmr Thhn 4/0 Awg Wire

Product Description

The THHNCU-GENERIC thhn4/0strgrnmr is a 4/0 AWG stranded copper THHN wire with green PVC insulation and a nylon jacket, rated for 600 volts and up to 260 amps at 90 degrees C in dry environments. Constructed with 19-strand copper conductors, this wire delivers the flexibility and conductivity required for feeder circuits, service entrance runs, and branch-circuit wiring in commercial and industrial applications. The green insulation color identifies this conductor as an equipment grounding conductor per NEC requirements. Licensed electricians and electrical contractors are the primary installers for wire of this gauge and ampacity.

This wire is suited for use in conduit in dry locations where a dedicated grounding conductor of substantial capacity is required. Typical applications include grounding runs for large motors, panel boards, switchgear, and industrial equipment. The 4/0 AWG size and 260-amp rating at 90 degrees C make it appropriate for high-demand commercial and industrial installations. It is available cut to length, making it practical for projects requiring a specific run without purchasing a full reel.

Key Features

• 4/0 AWG 19-strand copper conductor for flexibility in conduit routing
• 260 amp capacity at 90 degrees C dry, 230 amp at 75 degrees C, 195 amp at 60 degrees C
• 600-volt rating suitable for standard power distribution circuits
• Green PVC insulation with nylon jacket — identifies as equipment grounding conductor per NEC
• THHN type rated for 90 degrees C dry environments
• Available cut to length to minimize waste on specific job requirements

Compatibility

Designed for use in conduit systems where a 4/0 AWG THHN equipment grounding conductor is required in dry commercial or industrial electrical installations.

Installation Notes

Installation of 4/0 AWG feeder and grounding conductors should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize and lock out all circuits before pulling or terminating wire. Use appropriately rated conduit, lugs, and termination hardware rated for the conductor size and ampacity. Do not exceed the temperature rating of connected equipment terminations when applying ampacity values.

Technical Specifications

• Conductor Size: 4/0 AWG
• Stranding: 19 Strand
• Ampacity: 195 amps at 60 degrees C, 230 amps at 75 degrees C, 260 amps at 90 degrees C
• Voltage Rating: 600 volts
• Temperature Rating: 90 degrees C (dry)
• Conductor Material: Copper
• Insulation Material: PVC, Thermoplastic
• Jacket Material: Nylon
• Insulation Color: Green
• Wire Type: THHN
• Outer Diameter: 0.624 inches
• Weight: 718 pounds per 1000 feet
• Spool Length: 2500 feet

Standard Information

• Brand: THHNCU-GENERIC
• Manufacturer Part Number: thhn4/0strgrnmr