Thhncu-generic thhn10solgrn500r Thhn 10 Awg Solid Green 500ft

Product Description

The THHNCU-GENERIC thhn10solgrn500r is a 10 AWG solid copper THHN building wire rated for use in a wide range of commercial and residential electrical installations. The conductor is solid copper with a PVC insulation layer and a nylon jacket, giving it the heat and abrasion resistance required for conduit runs. It carries a 600-volt rating and a 90 degrees C dry temperature rating, supporting up to 30 amps of current capacity. The green insulation color designates this wire for grounding applications per NEC convention. Each spool contains 500 feet of continuous conductor.

This wire is used in branch circuit grounding, equipment grounding conductor runs, and panel-to-subpanel grounding installations in both residential and light commercial settings. It is pulled through EMT, rigid metal conduit, PVC conduit, or other approved raceway systems. The 500-foot spool format suits larger projects where pulling from a reel reduces splice points. Licensed electricians handle installation in accordance with NEC Article 250 for grounding and bonding applications.

Key Features

• Solid copper conductor provides reliable conductivity and consistent cross-section for grounding circuits
• Green PVC insulation meets NEC color-coding requirements for equipment grounding conductors
• Nylon outer jacket resists abrasion and oil during conduit pulls
• 600-volt rating suitable for standard branch circuit and feeder grounding applications
• 90 degrees C dry temperature rating supports use in warm conduit environments
• 500-foot spool minimizes splices on larger grounding runs

Compatibility

Designed as a standard THHN-rated equipment grounding conductor suitable for use in conduit systems where a 10 AWG solid green grounding wire is required by code or design.

Installation Notes

Installation must be performed by a licensed electrician in compliance with the National Electrical Code (NEC), specifically Article 250 governing grounding and bonding. Always de-energize the circuit and verify zero voltage with a meter before terminating conductors. This wire is rated for dry conduit installations only and should not be used in wet or damp locations without a separately rated conductor. Avoid sharp bends or kinks during the conduit pull to prevent insulation damage.

Technical Specifications

• Conductor Material: Copper
• Conductor Size: 10 AWG
• Stranding: Solid
• Insulation Color: Green
• Insulation Material: PVC
• Jacket Material: Nylon
• Wire Type: THHN
• Voltage Rating: 600 volts
• Current Rating: 30 amps
• Temperature Rating: 90 degrees C (Dry)
• Outer Diameter: 150 mil
• Spool Length: 500 feet
• Weight: 18 pounds (per 500-foot spool, based on 36 pounds per 1000 feet)

Standard Information

• Brand: THHNCU-GENERIC
• Manufacturer Part Number: thhn10solgrn500r