Thhn 14 Awg Solid Copper Wire White 2500 Ft Reel

Product Description

The THHNCU-GENERIC thhn14solwht2500r is a 14 AWG solid copper THHN building wire with white PVC insulation and a nylon jacket, supplied on a 2500-foot reel. Rated at 600 volts and 90 degrees C in dry locations, it meets standard requirements for branch-circuit and general wiring applications. The solid conductor construction is suited for conduit runs in residential and light commercial work where flexibility is not a primary requirement. Licensed electricians stock this wire for panel feeds, circuit drops, and device wiring where code calls for a 15-amp conductor.

This wire is used in residential and light commercial electrical installations routed through EMT, rigid metal conduit, intermediate metal conduit, or ENT. Common applications include branch circuit wiring for lighting, receptacles, and small appliance circuits. The white insulation identifies it as a neutral conductor per standard color-coding practice, though local codes and NEC guidelines govern actual usage. The 2500-foot reel quantity suits contractors wiring multi-unit buildings, tract homes, or commercial tenant improvements where bulk footage reduces job-site material handling.

Key Features

• 14 AWG solid copper conductor rated for 15-amp circuits at 60, 75, and 90 degrees C
• 600-volt rating suitable for standard branch-circuit wiring
• PVC primary insulation with nylon jacket for abrasion resistance during pull-through conduit installations
• 90 degrees C dry-location temperature rating per THHN designation
• White insulation color for neutral identification in multi-wire circuits
• 2500-foot reel format reduces splicing and simplifies bulk job-site distribution

Compatibility

Designed for use in conduit systems where THHN-rated 14 AWG solid copper wire is specified for 600-volt, 15-amp branch circuits in dry locations.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize and lock out the circuit or panel before making any connections. THHN solid wire is intended for conduit or raceway installation and is not rated for direct burial or wet locations without an additional wet-location-rated jacket. Avoid sharp bends that can crack the insulation on solid conductors during pull-through conduit work.